Solar-power 6-beams Active Wireless Infrared Light Wall

6 beams 100m infrared detection distance New detector easy perimeter security equipment installation and no interference. RF hopping & FM h special g technology avoid mutual interference. With interference indication function. High reliability outdoor perimeter security Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant Totally sealed and with on the spot sounder built-in Self-check and report to alarm host such as offset, low power, non working Functions and Specification: 1.It is a solar-powered ct and should be installed at place with sunlight intensity more than 2200lux. 2.It is six beams or infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:100m 4.mitting distance:100m 5.ency:433MHz 6.Maximum alarm times in 24 hours:<=50 times 7.Infrared light beam 6 beams 8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh 9.Working temperature: -30℃~70℃ 10.Working voltage:3.3V 11.Power storage type: LiFePO4 Battery 12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA 13.Infrared light frequency: secondary modulation & encoding based on 38KHz 14.Infrared light wave-length: 940nm+/-20nm 15.Output current of solar panel: Under the condition of 1800Lux lighting >=4mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux) 16.Dimension:840*84*45mm 17.Distance between infrared light hole: 35mm Watch video guide for installing toelectric beams at HB solar-powered new technology sensor has 3 beams, 4 beams, 6 beams and 8 beams with 100m, 50m and 20m infrared distance. Add more items or check other items of this series at