Equivalent grades | GB | DIN | AISI | JIS | - |
Cr12 | 1.2080 | D3 | SKD1 | - |
Chemical Composition | C | Si | Mn | Cr | P | S | - | - | - | - |
1.90-2.20 | 0.10-0.40 | 0.15-0.45 | 11.00-12.00 | â¤0.03 | â¤0.03 | - | - | - | - |
Available size | Round Bar | Diameter | Length |
60-800mm | 2000-6000mm |
Flat Bar | Thickness | Width | Length |
25-400mm | 200-800mm | 2000-6000mm |
Surface condition | Black surface/ Grinded/ Machined |
Annealed hardness | HB250MAX |
Characteristics | High strength, good hardenabilityHigh abrasive resistance and small shock loadVery high wear resistance against abrasive and adhesive wearMedium toughnessDimensionally stable High compressive strength |
Applications | High performance cutting tools for steet upto 4mm thickness,trimming dies,blanking dies for paper and plastic ,shear blades for cutting light gauge materialthreat rolling dies,drawing,deep drawing,pressure pads and highly wear-resistant plastic moulds |
Heat Treatment | Along with the furnace cooling after(850~870) °Cà (3~4)h . (740~760)°CÃ(4~5)h,out air coldLow impact toughness and should avoid tempering at about 950~1150°C |