Luyang wool ceramic fiber module from China

Specifications 1. The resilient blanket is resistant to mechanical damage 2. Low thermal conductivity give high thermal efficiency Ceramic Fiber Module Description CT ceramic fibre module adopt high quality ceramic fibre blanket, which is made up to compression module after folding, compression, packing module can choose kinds combination of anchor and furnace body, installation method is so simple that quicken the speed of furnace lining construction largely After installation, the bandaging are cut and the modules and so to form an integrated insulating lining. The anchor system in remote from he module hot face, maintaining the metal components at a relatively low temperature Features The anchorage on the back allows for both in-parquet installation. The decompression of the blanket folds gives tightly sealed intermodular joints with both configurations The resilient blanket is resistant to mechanical damage Low thermal conductivity give high thermal efficiency Total resistance to thermal shock No drying or curing required – so available for production operation immediately after installation The anchor is remote form the module hot face Typical Applications Heat treatment: annealing furnace, tempering furnace, soaking pit, etc Ceramic: whiteware, sanitary ware and brick firing tunnel and intermitted kiln. Iron and Steel: Transfer ladle lids, soaking pit covers, reheating furnace, continuous annealing furnaces, lift-off furnaces Petrochemical: ethylene pyrolysis furnace,reformers,atmosre / reduced pressure furnace,ductwork pyrolysis heaters Aluminium: Soaking pits and covers, bale out furnaces, homogenizing and ductwork Utilities: waste heat recovery units, combustion chambers and boiler ductwork Date sheet Type CT-1000 CT-1260 CT-1360 CT-1430 CT-1500 CT-1600 Classification temperature oC 1100 1260 1360 1430 1500 1600 Density(kg/m3)Density 170,190,210 170,190,200 Remark The values given herein are typical average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations. They are supplied as a technical service and are subject to change without notice. Therefore, the data contained herein should not be used for specification purposes. Product pictures Office in Nanjing Factories in China Construction projects