| Operating Voltage Range | 9 to 28VDC Volts Non-polarized |
| Standby Current | ≤60µA @ 24 VDC |
| Maximum Alarm Current (LED on: ) | ≤30mA @ 24 VDC |
| Operating Humidity Range | 10% to 93% Relative Humidity, Non-condensing |
| Operating Temperature Range | 14°F to 122°F (-10°C to50°C) |
| Adjustable Sensitivity | 1.06±.26%FT. |
| Height | 2.2˝ (55 mm) installed in Base |
| Diameter | 4.0˝ (103 mm) |
| Weight | 5.5 oz. (155 g) |
Maximum Alarm Current (LED on: ) ≤30mA @ 24 VDC
Operating Humidity Range:10% to 93% Relative Humidity, Non-condensing
Operating Temperature Range:14°F to 122°F (-10°C to50°C)
Adjustable Sensitivity:1.06±.26%FT.
Height:2.2Ë (55 mm) installed in Base
Diameter:4.0Ë (103 mm)
Weight:5.5 oz. (155 g)
AS-SD103 Conventional to Electric smoke detector use an intelligent optical sensing chamber.
This detector is designed to provide open area protection and to be used with most conventional fire alarm control panels where it can work from 9Volts to 32V D.C.
It has Two LEDS on each detector to provide a local 360° viewing alarm indication.
It flashes every five seconds, indicating that power is applied and the detector is working properly.
The LEDS latch on in alarm. The LEDS will be off when a trouble condition occurs, indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.
This detector supports External Remote indication LED.
Signup today to claim your Discount. Get Started before it's too late!
