Programmable Motor Driven Automatic Fire Monitor For Extinguishing Fire
Quick Detail:
â365days uninterrupted video monitoring.
â360° horizontal rotate and 120° vertical rotate.
âHigh pressure and large range of 360° coverage.
âInfrared thermal imaging detecting technology ensure no miss alarming and no fault alarming.
âApplicable voltage range:AC 110V~240V
âMultifunctions:Fire monitoring,Fire alarming and Fire extinguishing.
âEnerge saving.
âRemote control and automatically run.
Description:
Our automatic fire monitor discharge large volumes of suppression agent from a single fixed location, and at high pressure to give it an exnt range of coverage.The automatic fire water monitor has built-in infrared thermal imaging detector, UV flame detector, closed circuit television camera. Real time dynamic flame location and laser corrector. The automatic fire water monitor works with the external UV flame detector to eliminate the detection blind area and increase early warning range.When the automatic fire fighting monitor receives the fire early warning ) r monitor built-in image IR flame detector will automatically rotate along with the water monitor and lock the flame for 3 seconds, then spray to extinguish the fire. Otherwise, the water monitor will be considered as a false alarm, and the automatic fire monitor will reset automatically.
Specifications:
ZDMS0.6/5S-LZII | ZDMS0.6/10S-LZII | ZDMS0.8/20S-LZII | ZDMS0.9/30S-LZII | ZDMS0.8/40S-LZII | ZDMS0.8/50S-LZII | ZDMS1.0/60S-LZII | |
Working Voltage | DC36V | DC36V | DC24V | DC24V | DC24V | DC24V | DC24V |
Rated Pressure | 0.6MPa | 0.6MPa | 0.8MPa | 0.9MPa | 0.8MPa | 0.8MPa | 1.0MPa |
Protection Radius | â¤30m | â¤35m | â¤50m | â¤55m | â¤60m | â¤65m | â¤70m |
Rate of flow | 5L/s | 10L/s | 20L/s | 30L/s | 40L/s | 50L/s | 60L/s |
Installation Height | 6~15m | 6~15m | 8~35m | 8~35m | 8~35m | 8~35m | 8~35m |
Jet radius | â¤34m | â¤39m | â¤56m | â¤62m | â¤67m | â¤73m | â¤78m |
Positioning time | â¤30s | â¤30s | â¤60s | â¤60s | â¤60s | â¤60s | â¤60s |
Monitoring radius | 40m | 40m | 60m | 60m | 80m | 80m | 80m |
Flange Connection | DN50 | DN50 | DN80 | DN80 | DN100 | DN100 | DN100 |
Notices:
1.The side of automatic fire monitor with labelâthis side to wallâ must be faced to wall when installed.2.Video ected from DVR to cannon directly.3.t connect to cannon where it is 2m from cannon.4.Operation panel installed near the exit and 1.5m from ground,and from where operator can see all cannnons controlled by this operation panel.5.Pls take care when handling cannon as there is UV detector at the bottom of cannon.The UV detetor is fragile.6.Make sure there is no barrier around the cannon to stop the cannon 360 degree rotate.7.The ground lead of DVR,earth ning protection l console need be connected to your ground lead.
Applications:
Our automatic fire monitor are wildly used in Industrial,commercial and residential fields.Such as airport, high-speed railway station, bus station, hotel atrium, museum, library, TV studio, gymnasium, science and technology museum, exhibition hall, convention center, theater, cinema, civic activity center, industrial plant, chemical plant, gas station, oil port,helicopter hangar, power plants, logistics centers, hospitals, large shopping malls, commercial complexes, colleges and universities, coal mines, warehouses and other places with large space.
FAQ:
Q1: Are you a manufacturer?