Hi,Im interested in your product MVR steam compression evaporator, I would like some more details.below is my design requirements:1) Influent: Polyethylene Glycol(PEG) + Water ratio 50%:50%, Density : about 1.06 kg L2) Effluent: PEG + Water ratio 99.5%:0.5% Density: 1.12 kg L3) Capacity Influent : 63m3 day4) Capacity Effluent: 31 m3 day5) Heating Source: Con Show More...
Hi,Im interested in your product MVR steam compression evaporator, I would like some more details.below is my design requirements:1) Influent: Polyethylene Glycol(PEG) + Water ratio 50%:50%, Density : about 1.06 kg L2) Effluent: PEG + Water ratio 99.5%:0.5% Density: 1.12 kg L3) Capacity Influent : 63m3 day4) Capacity Effluent: 31 m3 day5) Heating Source: Conducting oil6) Option to use: MVR to save energy7) Boiling Temp PEG: about 150degC at atmosre I need to manufacture 63,000 Kg day of evaporator but the skid will be very large.Thus, we would like to split the capacity to 20,000 Kg day x 3 units so I can propose to my customer.Important information for us now is the dimension of the design and budgetary cost so we can check with our customers.Hope this information is enough for your design. Any other question, please feel to clarifyThanks and regards,Chong Hau, Technical ConsultantEcolance Technology Pte Ltd - a subsidary of Piping and Engineering Pte LtdMobile: +65 9728 4202Regards,Pang Chong HauThis Message is from mobile
Signup today to claim your Discount. Get Started before it's too late!
