- Hydraulic packer with 5 1 2" wedges, with 2 7 8" mandrel: Hydraulic-set packer with wedges. Increased resistance in specific parts such as the two-way jaws and the J groove. For Casing 5 1 2 Weight 15.5-17 lbs FT. Dimensions: O. D: 4.685; I. D. 2.37, Long. 5.02 FT: Max. Temp. 250 C. Max Working Pressure: Up: 8000 psi, Bottom: 6000 Show More...
- Hydraulic packer with 5 1 2" wedges, with 2 7 8" mandrel: Hydraulic-set packer with wedges. Increased resistance in specific parts such as the two-way jaws and the J groove. For Casing 5 1 2 Weight 15.5-17 lbs FT. Dimensions: O. D: 4.685; I. D. 2.37, Long. 5.02 FT: Max. Temp. 250 C. Max Working Pressure: Up: 8000 psi, Bottom: 6000 psi: Max Mandrel Tension: Working: 185, 000 lbs, Fluency: 255, 000 lbs: Collapse Pressure: 9486 psi, Pop Out Pressure: 8984.5 psi. Torque min, Opt, Max. 1725, 2300 and 2875 lb-FT. Connection (Box X Pin): 2 7 8. - Hydraulic tandem Packer with no wedges for 5 1 2" casing with 2 7 8" mandrel: Hydraulic set Tandem packer without wedges. Locking system, after release, to run up or down without problem. For Casing 5 1 2 Weight 15.5-17 lbs FT. Dimensions: I. D. 2.37, Long. 1089 "Max Working Pressure: Up: 8000 psi, Down: 6000 psi: Max Mandrel Tension: Working: 171, 000 lbs, Creep: 208, 000 lbs: Connection (Box X Pin): 2 7 8. - 1" Water Injection Valves: The W15-RLIB flow regulating valve has been developed for use in secondary water recovery systems. This type of valves allows the flow control of fluid entered in each zone. The valve will keep its constant flow predetermined and unrelated to any pressure change in the system or in the reservoir. Top entry and bottom exit. Regulation with differential lows. Easy field calibration using hole chart
Signup today to claim your Discount. Get Started before it's too late!
