Quick Details
- Data recording interval:Time can be set from 1 second to 60 minutes
- Communication distance(wireless):Max 100m
- Communication:433M, 868M or 915M (option)
- Battery:3.6 volt lithium battery,9000mAh; Battery can be replaced
- Installation:Installation with electricity; Disassemble with electricity
- Software requirements:PC-Linksoftware & microsoft Excel
- RAM:32 MB, 64M recommended
- Processing Time:7 days
- Port:Tianjin
- Supply Ability: 5000 Units Per Month
- Place of Origin:China
- Model Number:GF2018
- Brand Name:GFUVE
- Brand Name:GFUVE
Wireless Primary Current Sensor GFUVE GF2018 HV Anti-theft Device
Photos
Product Description
FEATURES
Collect and analyze load profiles
Easily clamps to the line in a few seconds
Check for load balance
Patented open CT sensor with ±1% accuracy
433M communication with no annoying cables to connect
Recorded data quickly downloads into the user's PC
PC-Link Software interface downloads directly into Microsoft Excel and PDF file
Generate reports and create graphs for profile analysis
DESCRIPTION
The Primary current sensor uses the same sensor technology as the original Rogowski
coil. The True RMS inductive sensor does not use magnetic materials. The opening of the sensor is electronically closed and external currents are electronically rejected.
The accuracy, external current reject, and range of currents measured by the patented
amp sensor substantially exceed the performance of the best clamp-on sensors. The key feature of the unit is the ability to leave it deployed on the line to record readings every 15 minutes
for 90+ days. It easily attaches to the line with a standard insulating bar. Once on the line, it immediately begins to collect and record the primary current on the line.
The Primary current sensor is equipped with a 433M wireless port for communicating
the recorded data into the user’s PC. The data is downloaded through GF2018S PC-Link Software, which allows the user to download, view and query the data stored on the Primary current
recorder.
The housing of the Primary current sensor is made of ABS+PC and is built to operate
safely, even in severe utility environments. It is resistant to shock, waterproof and resistant to flame. It also operates within a wide temperature range. The Primary current recorder has a
screw insulation bar of installation, which allows it to hang on the line securely in all weather conditions.
PC-Link Software is a user-friendly software interface that allows the user to
download, view, graph and export data from the Primary current recorder into Microsoft Excel. The data directly transfers from the Primary current recorder into Excel through an 433M
Port.
PARAMETERS
Basic parameters
Recording ammeter kit
3 wireless current sensors (GF2018A, GF2018B, GF2018C)
433 HHT(handheld terminal) or 433M wireless data reader(GF2018R)
PC-LinkSoftware software(GF2018S)
Carrying case
Data recording interval
1min, 5min, 10min,15min, 30min;
Time can be set from 1 second to 60 minutes
Communication distance(wireless)
Max 100m
Communication
433M, 868M or 915M (option)
Installation
Installation with electricity; Disassemble with electricity
Battery
3.6 volt lithium battery,9000mAh; Battery can be replaced
Software requirements
PC-Linksoftware & microsoft Excel
Processor
100 MHz or higher (200 MHz or higher recommended)
RAM
32 MB, 64M recommended
Drive space
15 MB to load software, 10 MB of operating Space
Use of position
Outdoor or indoor
Electrical parameters
Range of operation
Voltage
69kV,35kV,20KV, 10kV, 6kV, 0.38kV
Current
0 to 400A; 0 to 800A; 0 to 1500A; 0 to 3500A;
Sensor opening
Up to 3.3 cm
Resolution
Amps 1 to 99.9A
0.1A
100 to 300A
1A
Amps accuracy
±1% of reading plus 2 counts
Frequency
60Hz (57-63 Hz) or 50Hz (47-53 Hz) models available
Mechanical parameters
Weight (kg)
0.48
Carrying case(kg)
6.5
Environmental conditions
Operating temperature
-40°C to 60°C
Packaging & Shipping
Our Services
Company Information