抛丸机

The PMW5500 coiled wire shot blasting machine is a special equipment for cleaning coiled wires. It uses the shot blasting process to remove the oxide scale and scale layer on the surface of the wire.After the workpiece is shot blasted, the entire surface rust removal grade reaches Sa2.0-2.5 level, and the inside and outside are even and scratch-free. Compared with the pickling treatment method, it is economical, environmentally friendly, and efficient.The equipment adopts a unique "flip gate + simply supported shaft" working mode to carry coiled wires.The simply supported shaft is made of special alloy steel. The outer cover of the simply supported shaft has a special device with automatic bulk material function (note: wires above φ20mm need to be artificially bulked for the best effect). It forms an organic whole with the simply supported shaft during normal operation. Overall, this device is a patented product of our company (Patent No.: 201620372463.5). During the throwing process, the device makes the coiled wire perform a compound action of "up and down + left and right swing + forward and reverse rotation" to achieve a thorough cleaning effect.Compared with the cantilever shaft, the design of the simply supported shaft to carry the coiled wire greatly increases the service life of the spindle. Coupled with the reasonable arrangement of the shot blaster, the inner and outer surfaces of the coiled wire can be effectively cleaned by projectiles.The whole machine is controlled by PLC, making it easy and reliable to operate.The whole machine is controlled by PLC, making it easy and reliable to operate.