GFUVE Laboratory Multifunction Electrical Tester GF6018A Multimeter Calibrator

GFUVE Laboratory Multifunction Electrical Tester GF6018A Multimeter Calibrator Introduction of Power calibration products GF6018A Clamp Meter Calibrator with excellent working performance ,CE,ISO9001:2008,IEC approved Photos   Product Description FEATURES It can be semi-automatic or manual inspection of analog multi meter, clamp type current meter, all kinds of electric meter, (voltmeter, ammeter, frequency meters, resistance meter) basic error The equipment can be generated with 2-31 harmonic wave, harmonic number, order, amplitude and harmonic phase of fundamental wave can be programmed Power amplifier working frequency range is 40Hz-1KHZ, has a good linear. Current amplifier is constant current source; voltage amplifier is constant voltage source. Because of light weight, this device is more suitable for field use With RS-232 interface, this device is controlled by PC through the PC software (optional), can be automatic or manual inspection, and the results are processing and management Has a non-volatile memory, it can store 500 pieces of the raw data of tested meter, for access and upload   PARAMETERS Electrical parameters Power supply Single phase AC 220V±10% or 110V±10%, 50/60HzAC AC Voltage output range 200mV, 400mV, 2000mV, 4000mV,  20V, 100V, 200V, 500V, 1000V Range 20V-1000V Accuracy ±(0.03%RD+0.02%FS) Stability ≤0.01% FS /60s Range 200mV-4000mV Accuracy ±(0.3%RD+0.2%FS) Stability ≤0.04% FS /60s Load capacity 20VA Waveform distortion ≤0.3% Adjustable Range 0-120% FS (1000V not included) Fineness 5×10-5 AC Current Output Range 2mA, 4mA, 20mA, 40mA, 0.2A, 0.5A, 2A, 5A, 10A, 20A Range 0.2A-20A  Accuracy ±(0.03%RD+0.02%FS) Stability ≤0.01% FS /60s Range 2mA-40mA   Accuracy ±(0.3%RD+0.2%FS) Stability ≤0.04% FS /60s Load capacity 20VA Waveform distortion ≤0.3% Adjustable Range 0-120% FS Fineness 5×10-5 Frequency Output Range 45-65Hz Fineness 0.001Hz Accuracy 0.01Hz Harmonic Wave Times 2-31 Extent 0-20% Each harmonic phase fineness  0.01·N (N is  harmonic order) DC voltage output Range 200mV, 400mV, 2000mV, 4000mV,  20V, 40V, 100V, 200V, 400V, 1000V Load capacity 20W Adjustable range 0-110% FS (1000V not included) Adjustable fineness 5×10-5 Stability ≤0.01% FS /60s (peak-peak value) Accuracy ±(0.03%RD+0.02%FS) Ripple wave ≤1% FS DC current output Range 20uA, 40uA, 200uA, 400uA, 2mA, 4mA,  20mA, 40mA, 0.2A, 1A, 2.5A, 5A, 10A, 20A Load capacity 20W Adjustable Range 0-110% FS (1000V not included) Adjustable Fineness 5×10-5 Stability ≤0.01% FS /60s (peak-peak value) Accuracy ±(0.06%RD+0.04%FS) Ripple wave ≤1% FS Resistance box Range 0-200Ω, 200-400Ω, 0-2kΩ, 2kΩ-4kΩ, 0-20kΩ, 20kΩ-40kΩ,  0-200kΩ, 200kΩ-400kΩ, 0-2MΩ, 2MΩ-4MΩ Fineness 0.02% Range 0-2kΩ, 0-20kΩ, 0-200kΩ  Range 0-2kΩ  Adjustable Range 0-100%FS Accuracy ±(0.12%RD+0.08%FS) Range 0-200Ω,0-2MΩ Adjustable Range 0-100% FS Accuracy ±(0.3%RD+0.2%FS) Range 2kΩ-4kΩ, 20kΩ-40kΩ, 200kΩ-400kΩ Range 2kΩ-4kΩ Adjustable Range 5%-100%FS Accuracy ±(0.12%RD+0.08%FS) Range  200-400Ω,  2MΩ-4MΩ Adjustable Range 5%-100% FS Accuracy ±(0.3%RD+0.2%FS) Clamp meter range 200A Accuracy ±0.2% 600A Accuracy ±0.5% 1000A Accuracy ±1% Dot frequency square wave output Range 1kHz, 5kHz, 10kHz, 50kHz, 100kHz, 200kHz, 1000kHz Square wave amplitude 4.5V Setting accuracy 5×10-5 Mechanical parameters Dimension (L×W×H) (mm) 440x360x160 Weight (kg) 12 Environmental conditions Operating temperature 20°C±10°C Relative humidity ≤85%RH    Packaging & Shipping   Our Services   Company Information