Dust removal and desulfurization tower: The sulfur-containing dust airflow enters the tower body through the air inlet of the main tower body, and water enters the tower through rotating spray from the upper part of the tower body, atomizing the alkaid, forming a layer of water film in the entire tower from the top And flow downward. The flue gas enters and rises from the lower part of the tower body. Under the action of the refractive vortex, the sulfur-containing dust gas always forms friction with the water film and mist beads in the tower body, and chemical reactions occur. In this way, the dust-containing gas is moistened by the water film, and the dust particles It flows to the bottom of the tower together with the water flow, and is discharged from the overflow hole into the sedimentation tank and alkaid for neutralization and recycling. The purified gas passes through the upper porcelain ring to reduce the fog, and then enters the auxiliary tower body and passes through the adsorbent for a second fine desulfurization, dust removal and mist removal. After purification, the flue gas that meets the emission standards is discharged from the chimney.
Signup today to claim your Discount. Get Started before it's too late!
