Square Tile | 10X10X3~10mm, 17.5X17.5X3~15mm, 20X20X3~15mm, etc. |
Ceramic Plate | 100X100X6~50mm, 150X100X6~50mm, etc. |
Hexagonal Tile | S12.5xt3~20mm, S23.5xt6-25mm |
Dimple Tiles | 20X20X4-10+1(with 5 Dimples), 20X30X5~15+1(with 18 |
Ceramic Block | 40X40X40mm, 45X45X50mm,32X32X22mm, 38X38X38mm,etc. |
Ceramic Cylinder/Rod | 6X6mm,15X15mm,20X20mm, 31X31mm,40X40mm, 45X50mm, |
Al2O3 | 99% |
Density | 3.83G/Cm3 |
1. Detailed description:alumina cubesThe Ceramic Cube is a high-performance abrasion and impact resisting linings for high-impact, high-pressure applications in which ceramic tile may not have sufficient structural resistance, and high-performance rubber may not offer the required wear life. In extreme applications, the Cube n be installed in a on resistant steel plate to provide structural support for the ceramic/rubber de exceptional wear life where competing products cannot.Used in heavy industry for years as a cost-effective, wear-resistant solution, these lightweight materials offer high durability, strength, and exnt abrasion and corrosion resistance. Alumina wear resistant compositions include:l Alumina 92: most common wear product with great wear resistancel Alumina 95: increased wear performancel Alumina 96: premium alumina for best wear resistancel Zirconium toughened alumina(ZTA): increased strength and impact resistance2.Product features:> High hardness > Superior abrasion and impact resistance > Corrosion and chemical resistance > Light weight > Easy installation by epoxy resin or bolt > Improve your working environment-noise, vibration and safety3. Product Specification:- Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc.- Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc.- Hexagonal tile: S12.5xT3~20mm, S23.5xT6-25mm- Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples)- Ceramic Block: 40x40x40mm, 45x45x50mm,32x32x22mm, 38x38x38mm,etc.- Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.5. Ceramic wear lining tiles for a variety of applications:Processing equipment:l rmaceutical clean roomsl Food processing plantsl Grain handlingl Mineral processingl Cement manufacturingl Chemical processingl Large Cyclones:l Coal-fired power plantsl Steel Millsl Aslt Plantsl Petrochemical plantsl Pulp and paper mills
FAQQ: What is your experience in your products?A: We have 22 years experience in this industry are professional manufacturer in this area. Q: What is your MOQ?A: The MOQ is different as per different products, for example, 1 Ton for ceramic ball. Q: Can you accept small quantity sample order before production?A: Yes, we can offer sample for your testing first.Q: Can you provide free sample?A: Yes, within 1kg. Q: What is your production time?A: We have large stock for standard products. Normally within 7-10days after receipt the deposit. Q: What are your payment terms?A: T/T, L/C,
Category | HC90 | HC92 | HC95 | HCT95 | HC99 | HC-ZTA | ZrO2 |
Al2O3 | â¥90% | â¥92% | â¥95% | ⥠95% | ⥠99% | â¥75% | / |
ZrO2 | / | / | / | / | / | â¥21% | â¥95% |
Density | >3.50g/ cm3 | >3.60g/cm3 | >3.65g/cm3 | >3.70g/cm3 | >3.83g/cm3 | >4.10g/cm3 | >5.90g/cm3 |
HV 20 | â¥900 | â¥950 | â¥1000 | â¥1100 | â¥1200 | â¥1350 | â¥1100 |
Rock Hardness HRA | â¥80 | â¥82 | â¥85 | â¥88 | â¥90 | â¥90 | â¥88 |
Bending Strength MPa | â¥180 | â¥220 | â¥250 | â¥300 | â¥330 | â¥400 | â¥800 |
Compression strength MPa | â¥970 | â¥1050 | â¥1300 | â¥1600 | â¥1800 | â¥2000 | / |
Fracture Toughness KIc MPam 1/2 | â¥3.5 | â¥3.7 | â¥3.8 | â¥4.0 | â¥4.2 | â¥4.5 | â¥7.0 |
Wear Volume | â¤0.28 cm3 | â¤0.25cm3 | â¤0.20cm3 | â¤0.15cm3 | â¤0.10 cm3 | â¤0.05cm3 | â¤0.02cm3 |