ä¸ãProduct Summary
Dear users, thank you for using our single-flow non-valve water meter. Please read this instruction manual carefully before using it, so that you can easily use our products.
Single-stream water meter is mainly a water inlet direction, through which water flows into the movement of the water meter and scours the impeller of the water meter, thus obtaining a kind of water meter for measurement.
The counter adopts dry counter, which can keep clear reading for a long time. Choose high-quality materials, reliable performance, small initial flow, high measurement accuracy, beautiful and durable appearance; Magnetic sensor is adopted, which has stable performance and high reliability. However, it also has disadvantages. Because the stress points of a stream of water are relatively concentrated, the impeller of the water meter will be worn to some extent after long-term use, thus affecting the measurement and service life of the water meter.
Implementation standard: GB/T 778-2018 "Drinking Cold Water Meter and Hot Water Meter"
CJ/T 535-2018 "Internet of Things Water Meter"
äºãWorking Principle
The working principle of the rotor-type single-stream water meter is that the water flow tangentially impacts the impeller from the water inlet of the watch case to make it rotate, and then continuously records the of revolutions of the impeller through the gear reduction mechanism, thus recording the cumulative flow through the water meter.
ä¸ãFunction List
Serial /span> | Functions | Comments |
1 | Metering function | Accumulated flow of real-time Hall counter |
2 | Water metering data history storage local | 1. For the latest 90 days, the measurement data is stored every hour 2. The latest 180 days, the measurement data is stored every day 3. Monthly storage of measurement data in the latest year |
3 | Power supply | 1. Battery powered 2. External power supply |
4 | Main battery capacity level indication | The suffix of that current battery capacity level is report to the server in each metering data message uplink report |
5 | LED indication | Communication events; Screen Cutting Event |
6 | Manual triggering (triggering varies according to different models) | Button triggers an escalation event Magnet triggers report event Trigger 1 second switch screen Trigger 2 seconds to report data Trigger more than 9 seconds to restart the device |
7 | ology | Lorawan/NB/GPRS |
8 | External Interface | RS485/Mbus |
9 | Periodic reporting | 1 The default period is 24 hours Latest cumulative measurement data Water meter status: valve status/power supply Battery Capacity Level Downlink Indication |
10 | Timed reporting | 1 Fixed time (for example, 23:00, also configurable) triggers metering data reports every day, and the message payload is the same as the periodic report Latest cumulative measurement data Water meter status: valve status/power supply Battery Capacity Level 5LoRaWAN Downlink Indication RSSI/SNR |
11 | Alarm Message Uplink Report | Battery Capacity Low Level Alarm Backup Battery Switch Alarm Valve fault alarm |
12 | Screen digital display | 1 Display content: current reading, electric quantity, balance and valve status (default valve opening status of non-valve controlled water meter) 2 Display mode: normally bright (low power consumption screen) |
13 | Mode of transport | In the transportation mode, log is closed, communication is closed, pulse is not metered, and the operation with minimum power consumption is maintained |
14 | Antenna (Nb/Lorawan/GPRS) | Built-in antenna (spring/soft antenna) External antenna (chuck antenna) |
15 | Infrared Configuration (Optional, Default None) | Infrared Setting/Read Table Parameters Infrared Update Program |
16 | Communication mode | Supported Band |
| M66 (GPRS Communications) |
Tell Us What You NEED
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
Ok
|