Roller Diameter | 500mm |
Roller Width | 300mm |
Reducer | ZQ650 |
Ratio | 40.17 |
Main Shaft Speed | 8-10r/min |
Capacity | 8500-9500kg/h |
Pressure Type | Constant Pressure/Hydraulic Pressure |
Roller Material | 65Mn/high chrome alloy/9Cr2Mo |
Visiting Service | Local Airport Pick Up |
Machine Testing | Free Material Sample Testing On Site |
Color | Black |
(1) Powder material moulding machine is popular in briquetting powdery material in high economic profit.
(2) Raw material range from coal fines, anthracite coal, bituminous coal, subbituminous coal, coke fines, carbon powder, charcoal powder, carbon black, iron ore fines, mineral powder, metal dust, iron dust, mill scale, manganese ore fines, fluorite powder, gypsum powder, chemical salt, ferrosilicon powder, nickel alloy, blast furnace ash, converter dust, MgO, grate, oil shale, potash fertilizer, urea fertilizer, sea sand powder, etc.
(3)Â Should be added binder for good forming.
(4) It adds a certain amount of adhesive, after mixing evenly, and briquetted into various shape, like round, oval, pillow and square, etc.
(5)Â The final product is widely used in metallurgical, chemical, refractory, transportation industries, etc. for further recycling.
Â
Working Principle:
(1)Powder material moulding machine powered by three se asynchronous motor, the pulley, cylindrical gear reducer, through the rod to drive shaft pin coupling.Â
(2) Driving shaft and driven shaft through the exposed gear ensure synchronous operate, behind negative bearing seat is equipped with hydraulic cylinder or spring disc or wedge block system based on different material or customer require. (3) When the material enters to two rollers, they are squeezed tightly along with rollers rotation running, the half die holes on each side of rollers will be combined into one.
(3)Â The area on each roller reaches highest point, the machine pressure run up to peak, the powdery material are successfully molded into briquettes.Â
9