Factory Bucket Elevator Price

Bucket elevators are designed to move flowing powders or bulk solids vertically. Bucket elevators use an endless belt or chain and have a series of buckets attached to it. Bulk material is spread into an inlet hopper. Buckets (or cups) dig into the material and convey it up and over the head sprocket/pulley, and then throw the material out a discharge throat.Bucket elevators are not self-feeding, and are fed at a controlled rate. The buckets are usually where the chain or belt path is vertical or steeply inca single plane. The buckets are returned back down to a tail pulley or sprocket at the bottom.There are four broad classifications of bucket elevators: centrifugal, continuous, positive, and internal discharge. The most commonly used are the centrifugal and continuous discharge elevators.

Working principle of chain bucket elevator:

A chain bucket elevator can elevate a variety of bulk materials from light to heavy and from fine to large lumps. A centrifugal discharge elevator may be vertical or incrtical elevators depend entirely on the action of centrifugal force to get the material into the discharge chute and must be run at speeds relatively high. Incvators with buckets spaced apart or set close together may have the discharge chute set partly under the head pulley. Since they don't depend entirely on the centrifugal force to put the material into the chute, the speed may be relatively lower. Nearly all centrifugal discharge elevators have spaced buckets with rounded bottoms. They pick up their load from a boot, a pit, or a pile of material at the foot pulley.