Heat pipe pressurized solar water heater 200L20tubes

Model: IRA-HP58/1.8-20Material of out tank: 0.31mm thickness color steel/ fluorine carbon steelMaterial of inner tank: Food grade 1.0 mm thickness SUS304 stainless steelTank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamedInlet and outlet hole: Female G 3/4Max pressure: 0.9MpaSolar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipeThickness of glass tube: 1.6mmVacuum tube tightness: P≤0.005 PaAbsorption: as=0.93-0.96(AM1.5)Emission ratio: εh=0.04-0.06(80C±5C)Idle sunning property parameters: Y=220~260m2.C/KWAverage heat loss coefficient: ULT=0.6~0.7W/(m2.C)Bracket: 1.2mm thickness of galvanized steel materialStructure of tank: 6 holes for PT valve,water inlet and outlet,Mag Rod Welding: Argon arc weldingFastening pieces: Made of stainless steel screwAbsorber area: 1.874m2Heat pipe size: Dia14mm x 70mm length condenser,170cm length in totalHeat pipe material: TU1 copper Heat pipe power: >120W/pcsTemperature tolerance: from -35C to 250CTube quantity: 20 tubesOther Tube quantity: 8/10/12/15/18/20/24/30/36 tubesTank capacity: 200LOther Tank capacity: 80/100/120/150/180/200/240/300/360LHeat pipe pressurized solar water heater features:1.Adopts the best conduction performance metal- heat pipe (copper).2.Can be used all year round in the cold climate.3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly.4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa.5.No water in the tube, one tube broken don't influence the system working.6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage.7.Dual-purpose brackets for both flat and incf.8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out.Pressurized solar water heater working principle:1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure.2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot.3.No water in the heat pipe makes the whole system could bear pressure.