| Color | According requirement |
PC Series hammer mill mainly applied to low abrasion materials with medium hardness and compression strength not exceed 100Mpa. Such as coal, salt, chalk, gypsum, bricks, tiles, limestone, etc. It is also used to crush wood chips with strong fiber structure and tenacity, and the waste from asbestos cement to recycle asbestos fiber, etc. In addition, hammer crusher can be not only applied in crushing sand production also applied instead of cone crusher.
Performance and features:
Hammer crusher has the advantages of high product capacity, high crushing ratio, low power consumption, uniform products particle size, simple structure, compact and light, low investment cost, easy to management etc.
Working principle:
Hammer crusher mainly consists of frame, rotor, trapezoidal iron plate, bar grate, etc. And the frame consists of the upper part and the lower part, which are made of welded cut armor plate, while other parts are connected into one by bolts. High manganese steel e mounted in the frame and can be replaced after wearing out
There are several sets of hammers equipped on the main shaft of the hammer crusher in regular distribution. They constitute the rotor with dial and hammer shaft. Driven by the motor and V-belt, the main shaft rotate with rotors. And the rotors spread to the surrounding extensions under the centrifugal force brought from rotating. So when big materials fall into the crushing cavity of hammer crusher, they will be broken into pieces by high speed rotors. The qualified materials after crushing will be discharged from the gap of grate at the bottom, while those unqualified ones will still stay in the crushing part and then discharged when they reach the acceptable size after repeated actions of hammers and trapezoidal iron plates
Technical Data:
| Model | Input Size (mm) | Output Size (mm) | Capacity(t/h) | motor ratio(kw) | Dimensions(m) | Weight(t) |
| PC200*300 | <=100 | <=10 | 3-5 | 7.5 | 0.8*0.5*0.8 | 0.5 |
| PC400*300 | <=100 | <=10 | 5-10 | 11 | 0.9*0.6*0.8 | 0.8 |
| PC600*400 | <=120 | <=15 | 10-25 | 18.5 | 1.2*1.05*1.2 | 1.5 |
| PC800*600 | <=120 | <=15 | 20-35 | 55 | 1.3*1.2*1.3 | 3.1 |
| PC800*800 | <=160 | <=13 | 20-30 | 95 | 1.5*1.08*1.25 | 3.5 |
| PC1000*800 | <=200 | <=13 | 20-40 | 115 | 1.6*1.4*1.6 | 7.9 |
| PC1000*1000 | <=200 | <=15 | 30-80 | 132 | 1.8*1.6*1.8 | 8.5 |
| PC1300*1200 | <=250 | <=19 | 80-200 | 240 | 2.1*1.6*1.9 | 13.5 |
Welcome to Clirik !Our micro powder grinding mill factory is just 10 minutes far away from Pudong International Airport. We can pick you up from the airport. Thank you for your patient reading!Any needs and technical problems, us freely. We are more than glad to help. Our engineer will design a best solution drawing for you !
Signup today to claim your Discount. Get Started before it's too late!
