FURNACE CST-180, CST 280 - CST 380 FUEL

SPECIFICATION OF FUEL OIL CST 280 Â Â

PARAMETERS RESULT Â

Density @ 15°C ( Max ) Kg/L 0.97 Â

Kinematic Viscosity @ 50°C ( Max ) mm2/S 280 Â

Pour Point ( Max ) 24 Â

Flash Point ( Max )°C 65 Â

Sulr Total ( Max ) % Mass 3.5 Â

Carbon Residue Conradson ( Max ) % Mass 15 Â

Ash ( Max ) % Mass 0.15 Â

Water & Sediment ( Max ) % Vol 1.0 Â Â

SPECIFICATIONS FOR FUEL OIL 380 Cst  Â

TEST METHOD UNIT MAX RESULT

Density @ 15°C ASTM D1298 kg/L 0.9973 0.991

Kinematic Viscosity @ 50°C ( 122°F) ASTM D445 cSt 380 371.8

Total Sulfur Content ASTM D4294 % ( m/m ) 4.5 4.11

Water Content ASTM D95 % ( v/v ) 0.5 0.25

Flash Point By PMCC ASTM D93 °C 60 ( Min ) 66

Pour Point ASTM D97 °C 30 -3

Carbon Residue - Micro Method ASTM D4530 % ( m/m ) 18 11.8

Ash ASTM D482 % ( m/m ) 0.10 0.025

ual Fuel Oil by ICP Â

Aluminium Content IP 501 mg/kg < 5

Silicon Content IP 501 mg/kg < 10

Aluminium + Silicon Content IP 501 mg/kg 80 < 15

Zinc Content IP 501 mg/kg 15 1

srus Content IP 501 mg/kg 15 < 1

Calcium Content IP 501 mg/kg 30 6

Vanadium Content IP 501 mg/kg 300 77

Potential Total Sediment IP 390 Procedure A % ( m/m ) 0.10 0.01Â Â

SPECIFICATIONS FOR MARINE FUEL OIL 180 Cst Â

Characteristics Test Methods Limit RME180 Â

Density at 15oC, kg/m3 ISO 3675 or 12185 Max. 991 Â

Kinematic viscosity at 50oC, mm2/s ISO 3104 Max. 180 Â

Flash Point, oC ISO 2719 min. 60 Â

Pour Point (upper) (2)oC ISO 3016 Max. Â

Winter quality Max. 30 Â

Summer quality Max. 30 Â

Carbon residue, % (m/m) ISO 10370 Max. 15 Â

Ash, % (m/m) ISO 6245 Max. 0.1 Â

Water, % (V IV) ISO 3733 Max. 0.5 Â

Sulr, % (m/m) ISO 8754 Max. 3.5 Â

Vanadium mg/kg IP 501/IP 470/ISO 14579 Max. 200 Â

Aluminum,Plus Silicon,mg/kg IP 501/IP 470/ISO 14578 Max. 80 Â

Total sediment, potential, % (m/m) ISO 10307-2 Max. 0.1 Â

Â