Non-Asbestos Gasket – Adding Special Adhesives and A Little Packing

NON-ASBESTOS GASKET – GOOD ALTERNATIVE TO COMPRESSED ASBESTOS GASKET

Non-Asbestos Gasket is a general purpose sheet material reinforced with high-grade asbestos- free fibers and bonded with heat-resistant nitrile rubber.

It has exnt anti-stick performance on both sides. It is a good alternative to compressed asbestos gasket.

The gasket is suitable for engineering, auto mobile, chemical, oil & gas, petro chemical, power generation, paper, glass & ceramic, sugar, steel, smelter, boiler, rmaceutical, Marin and all applications where needs higher temperature and pressure resistance and where non-critical gaseous and liquid media have to be sealed off.

COMMON SPECIFICATIONS

Thickness (mm) 0.4–6.0

Available size (m) 1.5 × 1.6, 1.5 × 2, 1.5 × 3, 1.5 × 4, 1.5 × 6

Maximum continuous working temperature 650 °F

Steam max continuous working temperature -100 °F

Maximum pressure 85 bar

Tensile strength (MPa) ≥ 13

Residual stress (MPa) > 22

Compressibility 6%

Cold compressibility 8%

Cold recovery 3%

Hot creep 22%

Hot recovery 2%

Density (g/cm3) 1.6–2.0

Gas permeability (mL/min) <0.3

Color Black, white, red, blue, orange

FEATURES

Impermeability

Compressibility

Stress relaxation, creep resistance

Resilience

Temperature resistance

Premium quality

Exnt durability

Cost effective

Exnt Heat and Pressure

Chemical Resistant

Have good resistance to natural gases

Anti stick

Anti corrosion

CLASSICAL APPLICATIONS

Oil and gas

Chemical processing

rmaceutical equipment

Sea water equipment

Heat exchangers

Condensers

Pulp and paper industry

Power generation

A blue non-asbestos gasket mounted on the mechanical seals.

In mechanical seals

A green non-asbestos gasket mounted on the flange.