| Protection index | IP54 |
| Life (hours) | 5000 |
| Operating temperature (℃) | +80 -- -40 |
| Color temperature | Warm white |
| Color rendering index (Ra>) | 75 |
| Light effect (lm / w) | 120 |
| Light flux (lm) | 6000 |
| Input voltage (V) | DV12V/24V |
| Power Supply | 60-400w |
| Components | Parameters | |
Solar Module | Pmax(W) | 30-320W solar panel |
| Vmp (V) | 18V or 35.5V | |
| Imp (A) | From 1.67A to 9A | |
Light Fixture | Material | Aluminum die casting & Toughened glass |
| Operating Temperature | -40°C~75°C | |
| Protection Level | IP65 rate for led solar street light | |
LED Light Source | LED Chip | BRIDGELUX or Cree |
| Color Temperature | 3800-6500K(warm white/pure white) | |
| Luminous flux | 5300 LM led solar street light | |
| Operating temperature | -40°C~75°C | |
| Current Source | DC 12V/24V | |
| Power | 15W/18W/21W/24W/30W/36W/42W/48W/54W/60W/80W | |
Lighting Pole | Height | 3m/ 4m/ 5m/ 6m/ 7m/ 8m/ 9m/ 10m/ 11m/ 12 m |
| Material | Q235 | |
| Surface Treatment | Hot-dip galvanizing, Static spray for led solar street light | |
| Size | φ60-φ200,δ3-5m,vary according to models | |
| Flange Plate | 300*300*16, vary according to models | |
Battery | Capacity | 200AH (100AH*2pcs) |
| Type | Gel/AGM Battery | |
| Dimension | 546*1203*30 | |
| Weight | 28Kg, varying with different led solar street lights | |
Accessories | Cable | 2.5 mm2, 15m |
| Battery Box | 200AH ABS battery box or metal box with hot-dip galvanizing spray treatment | |
| Foundation Kit | Dismountable foundation kit, saving in shipping |
1. LED lamp(1) The heat sink is designed to be out in the air to dissipate heat quickly.(2) Frosted toughened glass, no glare light.(3) All-in-one structure, waterproof and dust-proof.(4) Individual LED: 1LED with 1 heat sink, fast heat dissipation makes it over 70,000 hours long life time.(5) Sleeve adaptor, no need to open the light fixture when installation.2. Solar panel(1) 5 years’warranty, no less than 90% of standard output power is within 10 years, 80% of standard output power is within 25 years.(2) High efficiency polycrystalono and adding Aluminum Frame, Tempered Glass.3.Gel battery(1) High efficiency polycrystalono andAdding Aluminum Frame, Tempered Glass.4. Controller(1) Short-circuit Protection: Once the load is short-circuiting connected, the controller will shut itself off to protect the solar system from damage.(2) Reverse Discharging Protection: It prevents the battery from discharging to solar panel.(3) Effective dust-proof and water-proof5. Lighting pole(1) Q235 Steel(2) Hot galvanized anti-corrosion treatment(3) Smooth surface(4) Pure polyester plastic powder coating is stable, and with strong adhesion & strong ultraviolet ray resistance. Film thickness is more than 100 um and with strong adhesion. The surface is not peeling even with blade scratch (15 * 6 mm square). Surface is smooth and color and luster are identical.
1.Q:How many cycles full charge&discharge about your battery?
A: In 50% discharging deepness, it can be cycled for 1,200 times; in floating charging and discharging status, it can be cycled for 5000~6000 times.2.Q:How to Choose the System Voltage 12V or 24V or for normal street Light ?
A: We can design the System for 12v or 24v for solar street Light or 220-380V for normal street light . 3.Q:What’s the main difference between mono and polycrystalr panel?
A: production process and cost. Polysilicon technology is more mature since it is an early technology compared with Monosilicon.4.Q:The controller of your solar street light has dual time control function?
A: our solar charge controller is designed with dual time control function, you can set up the lighting time and divide it into two parts, like 12 hours (6 hours full power lighting + 6 hours half power lighting)
Signup today to claim your Discount. Get Started before it's too late!
