Technical Quality Indicators of Barrage
The material is made of 9cm à 9cm à 9mm à 220cm hot bar and other corners of the angle, the column with 4cm à 4cm à 4mm à 190cm equilateral angle iron for the grid fence need to set up eight hanging network Hole, from the top and bottom under the spacing of 20cm, 22cm, 22cm, 18cm, 18cm, 15cm, 15cm, reinforced column material specifications: 7cm à 7cm à 7mm à 220cm hot bar and other corners of iron, hanging . Ground anchor iron reinforced pile material specifications: 4cm à 4cm à 4mm à 40cm à 60 hot bar and other corners of the iron bar rail door specifications structure requirements of the fence door for the iron, single fan width of 2.5 meters, 1.2 meters in height, easy Vehicle access. The frame is welded with 1 inch steel pipe, and the f Ï5 cold which is not twisted and not deformed. The barbed t up technical standards: two-se hanging een the pile spacing of 5 meters - 10 meters, above to set up a thorn bed -se hanging between the piles of 5 meters, to add cross the large section of the bend, according to the size of the curvature of the equipment barbed bar spacing. The depth of the laying of the barn column is 60-65cm. Strengthen the structure (1) in a flat area straight fence, the length of 50 meters within the use of single-span terminal structure, the length of 50-200 meters between the use of double-span terminal structure, the length of more than 200 meters, the use of double-span " "The total length of the fence is divided into parts of not more than 200 meters. (2) in the ups and downs of the nce, the reinforcement structure is located at the top of the hill and the foot of the mountain, set the requirements with the flat buried straight fence. Every 100 meters, should be set to strengthen the pile and support pile