Machine Type | Conventional lathe machine |
Spindle bore | 100mm |
Product type | Conventional Horizontal Turning Lathe Machine |
Precision | 0.01mm |
Spindle speed | 7.5~1000r/min |
Control system | GSK (Optional) |
High speed CW6163B conventional lathe machine with service
Â
The horizontal lathe series mainly applies to the inner and outer cylinder, the cone surface, and other rotating parts, can process all kinds of metric, English, modulus and diameter thread, it can also pull the oil groove and keyway. The machine tool is solid, power is large, can carry on high speed powerful cutting.
Standard Configuration :
Â
1. Bed rail width 550
2.Spindle head Model: C11
3. Spindle through hole diameter 100
4. Tail the tail sleeve: Morse5/6
5. 1.5 meters below the specifications without the center frame and with a knife
Â
Optional configure:
Â
1. Taper device additional price of 1000$, a small knife frame automatic knife device additional price of 0.3 million,double saddle additional price of 5200$ (Spindle head model C15, through hole diameter 140, plus 2500$)
Â
ITEM | UNIT | CW6163B | |
CAPACITIES | Swing over bed | mm | 630 |
Swing over carriage | mm | 350 | |
Max.length of workpiece | mm | 750 | |
Max.turning length | mm | 600 | |
Swing over gap | mm | 830 | |
SPINDLE | Effective widthof gap | mm | 300 |
Pan of guideway | mm | 550 | |
Spindle nose | Â | C11 | |
Spindle bore | mm | 100 | |
Taper hole of spindle | Â | 1:20/120 | |
Range of spindle speeds | r/min | 7.5~1000 | |
spindle speeds | Â | 18 | |
FEED | Longitudinal and cross | r/min | 64;0.1~24.32 |
Cross/long longitudinal feed | Â | Â 1/2 | |
Screw pitch of leadscrew | mm | 12 | |
TURRET | No. and range of metric thread | mm | 50;1~240 |
No. and range of inch thread | Â | 26;14~1 | |
No. and range of module thread | mm | 53;0.5~120 | |
No. and range of dia. thread | Â | 24;28~1 | |
TAILSTOCK | Rapid traverse speed | mm/min | 4000 |
Max.travel of cross slide | mm | 440 | |
Max.travel of top slide | mm | 200 | |
OTHERS | Section of tool shank | mm | 32(192x192) |
Dia. of tailstock | mm | 100 | |
Travel of tailstock quill | mm | 250 | |
Taper hole of tailstock quill | Â | mores 5 | |
Main motor power | kw | 11 | |
Length | mm | 2958 | |
Width/Height | mm | 1393/1537 |
                                          Â
Â
Â
The high performance bench lathe machine:
  The lathe machine is high work efficiency,we are very satisfied.
                                    From Aden>
General horizontal lathe machine:
 To our surprise, the lathe worked very well without any problems.
                                   Charlene from US
Â
Â
Â
Â
Â