Machine Type | Lathe Machine CNC |
Function | High Efficiency |
Spindle bore | 130mm |
Precision | 0.01mm |
Spindle speed | 3.15~315r/min |
Control system | GSK (Optional) |
Brand new CK61100 spindle bore 130mm cnc lathe machine with good service
These series are economical CNC horizontal lathe, which are not only suitable for automobiles, tractors, militaries, machines and other industries, but also can be used for the machining of the inner and outer cylindrical surface, conical surface, circular arc surface, end face, groove cutting etc.
Main Outlook:
Main configuration:
1.The control system uses a wide of funuc oi-TF (1 package).
2.1.5 m, 3 m X / Z motor with funuc feed servo motor 20Nm; 5 m, 6 m X / Z motor 22 / 36Nm.
3.The main motor adopts Funuc servo motor 22kw.
4.Shenyang vertical 4-station electric knife.
5.Electrical components Schneider.
6. X / Z to the use of domestic famous precision ball screw.
7.Spindle bearings using domestic famous products.
Other configuration:
1.Rail width of 755, load-bearing 6 tons, can change the weight of 8 tons.
2.Without semi-protection. Increase the cost of another.
3.Can be added chip machine. Increase the cost of another.
4.5 meters above the lead with a screw support.
5.Can be changed to the overall bedside box structure.
6.The air box does not have air conditioning.
ITEM | UNIT | CK61100 | |
CAPACITIES | Swing over bed | mm | 1000 |
Swing over carriage | mm | 630 | |
Max.length of workpiece | mm | 1500 | |
Max.turning length | mm | 1230 | |
Pan of guideway | mm | 755 | |
SPINDLE | Spindle nose | A2-15 | |
Spindle bore | mm | 130 | |
Taper hole of spindle | 1:20/140 | ||
Range of spindle speeds | r/min | 3.15~315 | |
spindle speeds | Manual four gear, the file Promise | ||
Center height from bed | mm | 500 | |
Chuck | mm | 1000 | |
FEED | increment | mm | 0.001/0.001 |
Rapid speeds | mm/min | 3000/6000 | |
Max.travel | mm | 520 | |
TURRET | Turret working position | V4 | |
Indexing time | s | 2.6 | |
indexing repeatility | mm | 0.01 | |
Section of tool shank | mm | 40X40 | |
TAILSTOCK | Dia. of tailstock quill | mm | 160/300 |
Travel of tailstock quill | mm | 100/250 | |
Taperhole of tailstock | Morse6 | ||
OTHERS | Workpiece accuracy | IT6~IT7 | |
Surface roughness | μm | Ra1.6 | |
Main power | kw | 22 | |
Lathe mass | kg | 9000 | |
Length | mm | 4500 | |
Width/Height | mm | 2435/2300 | |
CNC System | FANUC Series 0i-mate-TD/0i-TD |
Product Features:
Screw and light bar: to connect the box with the slide box, and the movement and power of the feed box to the slide box, to make the slide box to get the longitudinal straight movement. The screw is specially designed for turning the various threads of the car.
Slip board box: lathe feed movement control box, in which the light poles and the tool carrier of screw rotation movement into tion mechanism, through light bar transmission to realize tool post transverse and longitudinal feed movement of the feed movement and fast moving, and through the screw drive tool post for vertical tion, so that the thread cutting.
2. Payment terms: T/T or other ways us.
4. Delivery time: Within 20 working days after the down payment. (Actual delivery time depends on actual order.
2. Check the acceptance
2. Machine tool details if they 're normal, If have the trace of replacement and maintenance, If have other effects use of the problem.