| Application | Transfer pad |
| Color | Customized |
| Mixing ratio | 100:3/9:1 |
Product description
Pad printing silicone rubber for transfer pad is two component silicones usually used for pad printing with mixing ratio 100:3, or 9:1.
Usage
Produce printing pads, mainly used for printing the irregular patterns on plastic toys, electroplating products, electronic toys, trademarks, etc.
Characteristic
- High printing times and good printing effects
- Good tensile and tear strength, low shrinkage
- No Particle (Without any impurity)
- Resist the friction and good resilience
- Different colors (such as red, green, yellow, etc.) are available
- Great fluidity and easy to operate
Product data
| TEST | PROPERTIES | XD2028 | XD2030 |
| UNCURE | Color | customized | customized |
| Viscosity mPa.s (25℃) | 30000-4000 | 15000-2000 | |
| Working time of catalyzed mixture hours (25℃) | 30-45 | 30-45 | |
| Curing time hours (25℃) | 15 | 5 | |
| Mixing ratio (A:B) | 100:3 | 9:1 | |
| CURED | Hardness (Shore A) | 25±2 | 30±2 |
| Relative density g/cm3 (25℃) | 1.08±0.02 | 1.08±0.02 | |
| Tensile strength ≥(MPa) | 7 | 6 | |
| Elongation at break (%) | 450 | 450 | |
| Tear stength (kN/m) | 16 | 25 | |
| rinkage (%) | 0.3 | 0.1 |
FAQ
Signup today to claim your Discount. Get Started before it's too late!
