Organic silicone potting gel

Organic Silicone Potting Gel

l Application

This product is two-component silicone potting gel that can form a elastomeric rubber after curing at room temperature or in heating conditions.It is suitable for Lithium Battery Packing ,LED power supply and high-power tion Module Power Supply of Automobile.

l Feature

1.Low proportion , conducive to the lightweight of the product.

2.High thermal conductivity, exnt heat dissipation for high-power electronic components.

3.Superior weather resistance, anti-high temperature, electrical insulation, flame retardancy, anti-ultraviolet, anti-aging, low modulus, fast repair performance and strong impact resistance.

4.Low viscosity, good mobility, can penetrate into the small gap, with a good sealing performance .

5. With a faster overall curing speed, suitable for potting a large area.

l Use technology

1)Component A and component B should use special tools separately. Do not use the tools in mixture.

2)Separately stir component A and component B fully and evenly before using.

3)Mix according to A:B=1:1, and stir it over 15min to ensure the mixing uniformity of component A and B. Also can use electric mixer at low speed.

4) After mixing, deaerate the paste in vacuum equipment with 5min before potting.

5)The gel should be potted into the products ASAP after 4).

6)The higher temperature, the faster curing time. (The curing time can be adjusted according to customer's requirement )

l Parameter

l Attention

1.A/B component should be stored hermetically. To avoid waste, the mixed glue should be used up in one time.

2.This product is a non-dangerous goods, but should not be permitted to enter the eyes and mouth.

3.The sediment is allowed after the product has been stored for a long time. Please stir it uniformly before using .

4.The liquid glue will lose its solidification strength when it is exposed to the chemicals below:

(1)Organic compounds with N,P,S

(2)Ionic compounds with Sn,Pb,Hg,As,etc.

(3)Compounds with alkine and vinyl

l Advice

It is recommended that users should make a employment and suitability test before using this product. Due to the diversity of the practical application, our company assumes no responsibility for any problems made by users under the specific conditions. If encounter any problems , feel free to us .