Cheap electromagnetic flowmeter plug-in flow meter types

Description electromagnetic flow meter

Plug-in electromagnetic flowmeter is a new type of fluid flow meter developed on the basis of pipetromagnetic flowmeter. Can be cast iron pipe, cement pipe, PE pipe installation. The successful development of the inserted electromagnetic flowmeter provides a new measure for the fluid flow detection.

Detailed Images electromagnetic flow meter

Specification electromagnetic flow meter

Features

1 corrosion-resistant stainless steel, ABS full mold production probe;2 small size, light weight, easy installation, small amount of maintenance;3 converter is optimized design, compact structure, easy electrical installation, converter and sensor are interchangeable, can freely change the measurement range (0.5m / s ~ 10m / s);4 instrument application "automatic zero" principle, eliminating electrochemical interference f-stability;5 converters and sensors with a variety of protection levels and installation methods, suitable for diving installation of IP68 level;6 for water, sewage, acid, alkali and other conductivity in the 5μs / cm above the liquid flow detection, especially for the water supply and drainage pipe flow measurement;7 flow measurement only with the insertion depth, so the wide versatility of the flowmeter, interchangeability, a model can be applied to a variety of specifications of the piped measurement requirements;8 plug-in electromagnetic flowmeter in the large pipe flow detection, with the absolute advantages of installation and price advantage, especially for medium and large diameter pipe flow measurement;9 measurement range, the measurement from the temperature, density, pressure, viscosity, conductivity and other changes, the pressure loss is zero;10 can continue to flow in the case of installation, removal, maintenance for the user brought convenience;11 using advanced processing technology, solid-state packaging, vibration resistance, long life and other characteristics, the instrument has a good measurement accuracy and stability;12 digital communication output: RS485, RS232, HART, Modbus;

Plug-in electromagnetic flowmeter installation requirement

Sensor installed upstream straight section of not less than 5D (D said diameter), the downstream straight pipe is not less than 2D1, the vertical installation of the sensor should be inserted into the pipe and pipe cross-section of the vertical diameter angle of less than 5 °, suitable for measuring small vibration pipe cleaning medium.2, tilt the axis of the sensor installed with the measured pipe axis angle of 45 °, suitable for large diameter and measuring medium containing other impurities in the liquid flow measurement, the installation of water resistance is small, should not hang hanging.There are two ways to insert the sensor: one is to be inserted into the center axis of the pipe to be measured (ie, 1/2 pipe diameter); the other is to insert into the pipe inner wall at 1/4 of the pipe.Sensor installation1, clean the test tube mounting base of welding slag and burrs.2, turn off the upstream flow control valve or use low pressure water supply.3, DN50 ball valve installed on the mounting base, pay attention to the long cavity of the ball valve upward, check the ball valve is fully open, all off, the compression screw seat, compression nut and rubber seal installed on the ball valve, releaseLocate the nut, insert the sensor into the rod and insert it into the pipe under test. At the same time, note that the direction indicator rod of the sensor should point in the same direction as the fluid.

Company Information electromagnetic flow meter