Description small diameter electromagnetic flowmeter
Intelligent electromagnetic flowmeter consists of two parts, the sensor and converter. It is based on the work of Faraday's law of electromagnetic induction, used to measure the conductivity is greater than 5μS / cm conductive liquid volumetric flow rate, is a measure of the volume flow of conductive medium for induction meter. In addition to measure the volume flow of conductive liquid, it can also be used to measure the volume of a homogeneous liquid-solid two-se flow of a liquid suspension of acid and alkali and other strong corrosive liquids and slurries, pulp and paper pulp.
Widely used in flow measurement of petroleum, chemical, metallurgy, textile, paper, environmental protection, food and other industrial and municipal administration, water conservancy construction, river dredging and other fields.
Detailed Images small diameter electromagnetic flowmeter
Specification small diameter electromagnetic flowmeter
Nominal Diameter(mm)(Special specifications can be customized) | pipeafluoroethylene lining:DN10~DN2600 | |
| Pipeer lining:DN40~DN2600 | |
Flow direction: | positive and negative, the net flow | |
Turndown ratio: | 1500:1 | |
Repeatability error: | ± 0.1% of measured value
| |
Accuracy: | Pipe1.0 | |
Measured medium temperature: | ordinary rubber lining::-20~+60? | |
| High-temperature rubber lining: -20~+90? | |
| PTFE lining:-30~+100? | |
| High temperature tetrafluoroethylene lining:::-20~+180? | |
Rated working pressure: (High voltage can be customized) | DN6-DN80:≤2.5MPa | |
| DN100-DN250:≤1.6MPa | |
| DN300-DN2600:≤1.0MPa | |
Flow rate range: | 0.1-15m/s | |
Conductivity range: | the measured fluid conductivity≥5μs/cm | |
Current output: | load resistance | 0~10mA:0~1.5kΩ |
|
| 4~20mA:0~750 kΩ |
Digital frequency output: | transistor output frequency limit can be set with optical isolation within 1 ~ 5000HZ bidirectional open-collector output. External power supply is turned ≤35V maximum collector current of 250mA
| |
Power supply: | AC220Vor DC24V | |
Length of straight pipe requirements | upstream≥5DN,downstream≥2DN | |
Connection: | are used between the meter and piping flange connection, flange dimensions shall comply with the provisions of GB11988
| |
Explosion levels | mdIIBT4 | |
Protection class: | IP65,special order up to IP68 | |
Ambient temperature: | -25~+60? | |
Relative humidity: | 5%~95% | |
Total power consumption:
| less than 20W | |
Lining Material small diameter electromagnetic flowmeter
Electrode small diameter electromagnetic flowmeter
Features small diameter electromagnetic flowmeter
Fully digital processing, anti-interference ability, reliable measurement, high accuracy flow measurement range up to 1500: 1
Ultra-Low EMI switching power supply for supply voltage variation range, anti-EMI performance.
16-bit embedded microprocessors, computing speed, high precision, programmable low-frequency square wave excitation frequency and improve the stability of the flow measurement, low power consumption.
Using SMD devices and surface mount (SMT) technology, circuit reliability.
No moving parts inside the pipe l, unimpeded flow of parts, measuring almost no additional pressure loss.
Range in the field can be modified onrding to the actual needs.
Measurements and velocity distribution, the sical parameters of the fluid pressure, temperature, density, viscosity and the like.
High-resolution backlit LCD display, full Chinese menu, easy to use, simple to operate, easy to understand.
Have RS485, RS232, Hart, and Modbus and other digital communication Optional)
Self-test and self-assertion.
Total hourly recording function to record the total flow in units of hours for hourly metering system (optional)
Three internal totalizer can show the cumulative amount of forward and reverse cumulative amount of the difference between the volume totalizer, the internal power-down features not always, can record 16 power-down times. (Optional)
IR handheld operator, 115KHZ communication speed, long-distance non-operation of all functions converter (optional)
Range table small diameter electromagnetic flowmeter
Selection Guide small diameter electromagnetic flowmeter
Example:local display type electromagnetic flowmeter sewage pipes for user DN50, require rubber lining, stainless steel electrodes, 4 ~ 20mA output, no communication, limit the flow of 30m3 / h. Models should be: LDG-50S-M1X100-30
Company Information
Signup today to claim your Discount. Get Started before it's too late!
