Heating Boilers With Solid Fuel, Automatic Installation And Four-Pass
The New SystemSolitaf automatic installation heating boilers with solid fuel differing from others with their rotating four-pass flame and watery chimney system have been produced with high-tech in accordance with TS EN 303-5 so that they can burn every kind of solid fuels like coal, oil pomace, nutshell that have a size up to 20mm.Saving EnergyWith an automatic heating system, starting and stopping the heater at any temperature is available. Air providing burning with digital control board is regulated sensitively and the heating boiler keeps heating at any desired temperature. Therefore, the desired temperature is kept constant in the environment. When the fuel is used up, the system closes itself automatically.High EfficiencySolitaf automatic installation solid fuel heating boilers with its four-pass flame circulation system hold the flame longer by turning it four-times in the tank. In addition, with watery chimney system, the heat of gas released to the atmosre is greatly reduced. Flue gas temperature is reduced about 180 C – 200 C compared to 2 or 3-pass heating boilers. Therefore, the maximum efficiency can be obtained from the fuel used.Ideal BurningSince the stocking of the fuel into the tank is done from the bottom by means of helix, the possible problems such as extinguishing of flame are solved and with the combustion air coming from circular surfaces of combustion tank, the fuel is combusted ideally and homogenously.AssuranceSolitaf heating boilers with solid fuel automatic installation offer a reliable and an economic solution for warming all kinds of houses and offices with their superior qualities. Our products have TSE and CE certificates and they are under guarantee for two years.
