Automatic Grade | Automatic |
Cylindrical Grinder Type | Flat Grinder |
Precision | High Precision |
Certification | GS, CE, RoHS, ISO 9001, Ks (South Korea) |
Condition | New |
Cutting Capacity | Max Thickness |
Front and Back Moving Speed | 5-28m/Min |
Motor of Worktable | 11kw |
HS Code | 8460909000 |
Power of Grinding Head Motor | 18.5kw |
Up and Down Moving Motor | 2kw |
Transport Package | Wooden/Steel Box |
Up and Down Moving Speed | 5-3000mm/Min |
HG-1420 CNC moulding machine ultra-useful-Metal surface grinding machine CNC Gantry Grinding Machine purchase-Steel sheet surface machining CNC Vertical grinding
Items | Unit | HG-1420NC |
Max grinding length | mm | 2000 |
Max grinding width | mm | 1100 |
Net width of inside | mm | 1400 |
Max thickness | mm | 500 |
Worktable dimension | mm | 2000Ã1000 |
Front and back moving speed | m/min | 5-28 |
Left and right moving speed | mm/min | 5-3000 |
Up-and-down moving speed | mm/min | 5-3000 |
Min calibration | mm | 0.005 |
Power of grinding head motor | kw | 15 |
Speed of grinding head | rpm/min | 1400 |
Grinding wheel | mm | 500Ã80Ã203 |
motor of worktable | kw | 11 |
Left and right moving motor | kw | 2 |
Up-and-down moving motor | kw | 2 |
Max loading weight | kg | 3000 |
Machine weight | kg | 21000 |
The horizontal grinding head adopts high-precision flange type spindle design. With three pairs of super-precision angular bearings (made in Japan/Germany), using high-temperature resistant high-grade lubricating grease, completely sealed, no need for additional maintenance. Therefore, it can maintain high quality characteristics such as low noise, high precision and low temperature during grinding. 2.Worktable drive The worktable adopts the fully supported double V self-positioning type hard rail design, the base rail is processed by high frequency, HRC55°±3°, the worktable rail is affixed with PTFE rail tape, to ensure the good smoothness and guidance of the table motion rail. 3.Gantry frame The lower part of the double column is firmly connected with the bed, the upper part is tightly connected with the beam, and the machine bed, the double column and the beam form a rigid closed frame structure.4. Grinding head drive The grinding head is equipped with AC servo electric drive, with large torque and accurate feed.
The machine base adopts automatic circulating lubrication device. The horizontal and vertical motion guide rails and the ball screw adopt timing and quantitative automatic lubrication device, the operation is humanized, and the machine runs safely and reliably.
The machine coolant device is recycled after multi-stage filtration.