Cover | HDPE film |
Sinomaco Self Bonding Bitumen Waterproofing Membrane is a kind of bitumen membrane with new technology which is made of self-adhesive polymeride modified bitumen as the base materials and covered with PE film, Aluminum film, fine sand or PET film. It can be made without of any reinforcement layer called non reinforced type or it can be reinforced with polyester fiber to be more strong called polyester type.
Product Feature
1. Strong self-adhesion, self-adhesion to the ground base, safe, environmentally friendly.
2. The construction is simple and quick, the wet base is Wet-laid method, and the dry base is dry-laid method.
3. Super strong adhesiveness, reliable and firm lap seam, The life of the seam is as long as the membrane.
4. Exnt heat and low temperature performance, suitable for use in cold and high temperature areas.
5. Integrate bonding, healing, sealing and extending functions.
Application Scope
1. Widely used in industrial and civil construction of roofing, basement, subway, tunnel, water conservancy, wood or metal structure roof and other waterproof and moisture-proof projects.
2. It is especially suitable for special industries such as oil depots, chemical plants, textile mills, and grain warehouses which are not allowed to use heat welding method to apply.
3. It is suitable for waterproof and antiseptic in the area of coastal tyon or seawater corrosion and large structural deformation.
Basic Specification | |||
Reinforce layer | Width (mm) | Thickness(mm) | Cover material |
Polyester base (PY) | 1000/2000 | 2 / 3 / 4 | Polyethylene film (PE), fine sand (S), no film double-sided self-adhesive (D) |
Non base (N) | 1.2 / 1.5 / 2.0 | Polyethylene film (PE), polyester film (PET), no film double-sided self-adhesive (D) | |
Note: Membranes divided into type I and II, the 2.0mm PY base model only have type I.OEM Available, be produced based on customers demand. |
Transportation & storage
1. Storage temperature is not higher than 40°C. The storage period is six months from the date of production, and it can still be used after it passes the inspection. The coils shall be placed horizontally and stacked in a height of not more than five layers to prevent tilting or lateral pressure.
2. The construction site shall have special warehouses stacked to prevent the sun and the rain. Special packing bag sealed packing, prevent sun and rain during storage and transportation.
Technical Data Sheet (TDS)
--- Test Report of N-type membrane
Performance Test Report of N-type membrane (Standard GB23441-2009) | ||||||||
S/N | Item | Index | ||||||
PE | PET | D | ||||||
â | â ¡ | â | â ¡ | |||||
1 | Tensile Strength | Tensile | â¥150 N/50mm | â¥200 N/50mm | â¥150 N/50mm | â¥200 N/50mm | - | |
Elongation at maximum tension | 200 % | 30% | - | |||||
Aslt elongation at break | 250 % | 150 % | 450% | |||||
Stretching nomenon | During the stretching process, there is no separation between the aslt coating and the film before the film breaks. | - | ||||||
2 | Nail tear strength | ⥠60 N | ⥠110 N | ⥠30 N | ⥠40 N | - | ||
3 | Heat resistance | 70°C, slid no more than 2mm | ||||||
4 | Low temperature flexibility | -20 â | -30 â | -20 â | -30 â | -20 â | ||
No crack | ||||||||
5 | Impermeability | 0.2Mpa,120min; Impermeable | - | |||||
6 | Peel strength | With other membrane | â¥1.0 N/ã | |||||
With aluminum sheet | â¥1.5 N/ã | |||||||
7 | Nail rod water tightness | Qualified | ||||||
8 | Water permeability / of sheets | ⤠2 | ||||||
9 | Continuous stickiness | ⥠20 min | ||||||
10 | Thermal aging | Rally retention rate | ⥠80 % | |||||
Maximum tensile elongation | â¥200 % | â¥30 % | â¥400 % | |||||
Low temperature flexibility | -18 â | -28 â | -18 â | -28 â | -18 â | |||
No crack | ||||||||
Peel strength between membrane and aluminum plate | ⥠1.5 N/ã | |||||||
11 | Thermal stability | Appearance | Without drum, folding, sliding, flowing | |||||
Change in size | ⥠2 % |
--- Test Report of PY-type membrane
Performance Test Report of PY-type membrane (Standard GB23441-2009) | |||||
No. | Test Item | Test Index | |||
â | â ¡ | ||||
1 | Soluble content | 2.0mm | 1300 | - | |
3.0mm | â¥2100 g/ã¡ | ||||
4.0mm | â¥2900 g/ã¡ | ||||
2 | Tensile Strength | Tensile | 2.0mm | â¥350 N/50mm | - |
3.0mm | â¥450 N/50mm | â¥600 N/50mm | |||
4.0mm | â¥450 N/50mm | â¥800 N/50mm | |||
Elongation at maximum tension | ⥠30 | ⥠40 | |||
3 | Heat resistance | 70°C, without sliding, flowing, dripping | |||
4 | Low temperature flexibility | -20 â | -30â | ||
No crack | |||||
5 | Impermeability | 0.3Mpa,120min, qualified | |||
6 | Peel strength | With other membrane | â¥1.0 N/mm | ||
With aluminum sheet | â¥1.5 N/mm | ||||
7 | Nail rod water tightness | Qualified | |||
8 | Oil permeability / of sheets | â¤2 | |||
9 | Continuous stickiness | ⥠15 min | |||
10 | Thermal aging | Maximum tensile elongation | ⥠30% | ⥠40 % | |
Low temperature flexibility | -18â | -28 â | |||
No crack | |||||
Peel strength between membrane and aluminum plate | â¥1.5N/mm | ||||
Dimensional stability | 1.5% | 1.0 % | |||
11 | Self-adhesive aslt peel strength | ⥠1.5N/mm |