High Torque Air Motor

Lubricated Air Motors

Lubricated Air Motors are designed to thrive in harsher environments, as lubrication protects internal components and helps carry away smaller particulate which can evade filtration.

Stainless Steel Air Motors

Fully sealed and sanitary design, these corrosion resistant stainless steel Air Motors can be mounted in any plane with face or flange mounting options.

Non-Lubricated Air Motors

No lubrication necessary for these corrosion resistant air-motors. Hub and foot mounting options available and units can be mounted in any plane.

Gear Motor

By integrating a lubricated Air Motor with an inight angle gearbox, the resulting Gear Motor creates greater torque and slower output speed.

Why use a air motor

Variable Speed

You can var vary air motor speed between 300 and 10,000 rpm(depending on model selection) with a simple valve put I between the air source and air motor.

Non-electrical Sparking

As a non-electrical device, the possibility of explosion from ignoring flammable gases is greatly reduced.

Instantly Reversible

A four-way valve in the air les Air Motors to be instantly reversed. A turn of the valve causes a complete reversal of rotation, even when the motor is running at full speed.

Cool Running

As the air motor turns, expanded air cools the motor. Units can be used in ambient temperatures up to 250 degree F (120degree C) in a non-hazardous atmosre.

Compact and Portable

Get maximum horsepower with minimum size and weight.

Minimum Maintenance

You can put a Air Motor in place where they will not get much service, because there virtually nothing to service on a Air Motor, providing it is operated on a clean, dry, and lubricated air supply.

Will Not Burn Out

Air Motor can be stalled or overloaded for long periods without damage.

Low Price

Cost is less than other motors of equal horsepower and capabilities.

Operate in All Positions

Mount them sideways, upside-down, or in any position so long as adequate lubrication is provide and end thrust is kept to design limits. Gear motors will operate I almost any position, see model data.

Low-shock Starts

Because Air Motors go to work with air-cushioned smoothness, they cut stress on your equipment.

Self-sealing Vanes

Vanes and self-sealing ad automatically take o their own wear, thus ensuring constant output for thousands of hours of use.

Mounting Flexibility

Foot, hub, face, NEMA-C, or metric flange motor mountings are standard equipment for most air motor sizes.

Four-vane or Eight vane

For-vane units meet most requirements, but for more precise inching control and minimum blow by in applications where motor is operating in a stalled condition, specify eight-vane models.