Al2O3 | 92% |
Density of Al2o3 | 3.6g/cm3 |
Wear volume | 0.55cm3 max |
Rubber | Natrual rubber |
Density of rubber | 1.4g/cm3 |
Steel | Q235A |
Density of steel | 7.85g/cm3 |
Steel thickness | 5mm |
Size | L500 W500 H33mm |
Product: Ceramic-Rubber-Steel backed Panels
1. Product description:
Wear Resistant Ceramic-rubber-steel backed panels is made by a combination of wear resistant alumina ceramics(cylinders,hexagon,square mosaic ceramic tiles) vulcanized in resistant rubber base, and then the rubber plates are with steel backing.
The alumina ceramic vides exceptional resistance to wear, while the elastic property of the rubber effectively dampens the impact forces which can crack the ceramics. Rubber also helps to substantially reduce the vibrations, sounds, and the impact shock generated from impacting rocks.
As exnt impact and wear resistant material,The Rubber ceramic suitable for feeders, chutes, bins, transfer points, in conveyor systems, screen feed plates, mill discharge chutes, bunker etc. The major applicable industries are Coal fired power plants, cement plants, blast furnace plants and host of other industries which requires high impact abrasion resistant surfaces.
2. Product Structure
>metal+rubber+ceramic
>rubber+ceramic, and the surface .
3. Standard Size :
Size Sheet
600*600*30 mm
600*600*37 mm
250*250*30 mm
300*300*63 mm
250*250*37 mm
500*500*25 mm
200*200*25 mm
500*500*37 mm
450*300*63 mm
500*500*63 mm
4. Specification
High alumina ceramic:
Alumina Oxide: al2o3>92%
Specific gravity of ceramic 3.6 g/cm3
Hardness(Mohs) > 9 t
5. Uses:
The Rubber ceramic suitable for feeders, chutes, bins, transfer points, in conveyor systems, screen feed plates, mill discharge chutes, bunker etc.
6. FACTORY