Baseball Bat Making Automatic Cnc Wood Lathe
Item | Specifications |
Max processing length | 1500mm (can customm) |
Max turning diameter | 300mm |
Air pressure | 0.6-0.8Mpa |
Power supply | AC 380V 3 se 50HZ/60HZï¼can  custom 220Vï¼ |
Max feed rate | 5000px/min |
Min setting unit | 0.25px |
Transmission  type | ballscrew for X Z axis, gear for Y axis |
Guider | Taiwan Hiwin orbit |
Main shaft rotating speed | 0-3000r/min |
Motor power | 4kw |
Cutter material | Super hard alloy |
Control  System | DSP control system |
Motor | Stepper motor |
Driver | Yako driver |
Inverter | Best inverter |
Drawing Software | AutoCAD |
Hand controller recognize file | *.dxf |
Machine size | 3*1*1.5m |
Packing size | 3.15*1.25*1.6 |
N.W | 1500kg |
G.W | 1600kg |
Model: | TJ 1530(1500*300mm) _1 axis_2 blades |
Structure: | Cast iron |
Spindle shaft: | Sturdy spindle, NSK deep groove ball bearing, P5 grade. |
Drive  system: | -  Three se current of 380V, 50HZ. 4 Kw. , 1 set -  Stepper motor: 450B 2 sets -  Stepper driver: YKAO2811MA 2 sets -  Servo motor |
Inverter: | Best inverter 5.5 kW (Fuling brand is optional) |
Guide rail: | Taiwan HIWIN/PMI uare guide rail. |
Spindle speed: | 3000r/min |
Material size: | 300*2500 mm (length: 2000mm, 2500mm, 3000mm are optional) |
Center Sleeve ID: | 1.414 times the side length of material (no need sleeve if material diameter is  more than 60mm) |
Weight â bearing: | 500kg |
Engraving speed: | 4m/min |
Max. feed | 15mm/r |
Max. feed rate: | 700 mm/min |
Min. setting unit: | 0.1mm |
Pivoting device: | Pneumatic air connection within 6-8 bar. |
Tailstock: | Precisely and easily movable, with quick clamping with pneumatic |
Electric system: | Air  break switch protection |
Dimensions (L*W*H): Machine (without operation box) |
Tell Us What You NEED
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
Ok
|