| Forming Material Thickness | 1.0-2.5mm |
| Working Speed | 0-15m/min |
| Forming Motor | 22KW |
| Shaft Diameter | 70mm |
Solar Strut Channel Cold Roll Forming Machine With Servo Feeding Device & Press Punching Machine
Main Specifications of Solar Strut Channel Roll Former
| Decoiler / Uncoiler | Decoiler Type | Manual or Hydraulic or Auto Type |
| Coil Width | Max. 1250mm | |
| I.D | 508-610mm | |
| Leveling Device | 7 Rollers type leveling | upper 3 rollers, lower 4 rollers |
| Motor Power | 3.0KW | |
| Servo Feeding Device | Servo motor power | 0.85KW |
| Servo motor brand | YASKAWA (Japan) | |
| To exact accurately feed the sheet into punching machine according to the set program | ||
| Press Machine Device | Punching Type | Press machine type |
| Punching Pressure | According to customer's requirements | |
| Punching Mold Size | According to drawing | |
| Punching Mould | 1 set | |
| Main Power | 7.5KW | |
| Main Roll Forming Part | Forming material thickness | 1.0-2.5mm |
| Forming material type | GI | |
| Forming motor | about 22KW | |
| Drive type | Chain drive | |
| Shaft material | 40Cr high grade steel tempering treatment (HB220-260) | |
| Bearing | HRB bearing | |
| Roller material | GCr15 steel, HRC 58-62 and roller surface with hard chrome 0.05mm | |
| Forming station | about 24 stations | |
| Turkey head for adjust the finished profile before cutting | ||
| Hydraulic Cutting & Hydraulic Station | Cutting type | Hydraulic post-cutting after roll forming |
| Cutting blade material | Cr12Mov, Quench treatment, HRC58-62 | |
| Hydraulic power | 4.0KW | |
| Hydraulic pressure | 15Mpa | |
| Cutting tolerance | +/-1.5mm | |
Signup today to claim your Discount. Get Started before it's too late!
