Forming Frame Structure | Guiding Colum |
Material Thickness | 0.2-0.8mm |
Main Power | 7.5KW |
Cutting Power | 2.2KW |
Aluminum, Carbon Steel Pu Foam Rolling Shutter Door Making Machine With Servo Tracking Flying-Saw Cutting
Main Technical Specifications
Coil Material | Material Thickness | 0.7-1.5mm |
Coil Width | Customized | |
Yield Strength | G250-350Mpa | |
Coil Material | Aluminum, GI. or Carbon Steel | |
Decoiler / Uncoiler | Decoiler Type | Manual or Hydraulic or Auto Type |
Coil Width | Max. 1250mm | |
I.D | 508-610mm | |
O.D | Max. 1500mm | |
PU Foam Roller Shutter Machine | Forming Stations | About 34 Stations (Depend on profiles) |
Roller Material | High grade GCr15 | |
Diameter of Shaft | 40mm or 50mm | |
Shaft Material | High grade 45# steel with heat treatment | |
Drive Type | Gearbox drive | |
Forming Speed | 0-15m/min | |
Main Power | 7.5KW | |
Foaming Machine | With two group " ISO / POLY " | |
Low-pressure foamin machine | ||
Straighten Device | To straighten the profile | |
Pneumatic Punching Machine | Material of Cutter | Cr12Mov, quenched HRC58-62 |
Continuous Punching | ||
Servo Tracking Flying Saw Cutting | Servo Tracking Fly-saw cuting | |
Servo Power | 1.5KW | |
Cutting Power | 2.2KW | |
PLC Control System | PLC | PANASONIC Brand |
Inverter | YASKAWA Brand | |
Touch Screen | PANASONICE | |
Operation Type | Touch screen & Button | |
Support Table | Table Type | Simple nonpower type |
Function | To support the finished panels |