VA3 Pro Ex is a professional vibration analyzer determined to protect your machinery. Build your kit according to your needs. Single or multi axis sensors, speed probe and other accessories are ready for your vibration analysis and predictive maintenance program on general.Machinery condition monitoring is a necessity also in hazardous industry environments such as mines, oil & gas, petrochemical etc. To protect human lives and equipment the devices used in such harsh areas has to be explosion proof. VA3 Pro Ex is ready at your service.VERSATILITY & CONNECTIVITYVA3 Pro Ex3x AC input â vibrations3x DC input â process values1x Trigger input (speed probe)Triaxial sensor readyIR temperature sensorLED stroboscope / flashlightFast USB 2.0 communicationRobust Push-Pull connectors
Collect & Import
VA3 Pro Ex along with free DDS software can measure and store two basic measurements. Acceleration in g for the bearing condition and Velocity in mm/s (or ips) for the whole machine body condition.
Collect the data with VA3 Pro Ex regularly and import them into free DDS software. Follow vibration trends and observe the actual condition of your machines.
VA3 Pro Ex specifications
Ex certification:
II 3G Ex ic op is IIC T3 Gc
Input channels:
3 x AC, ICP® power supply on/off3 x DC for process values1 x TACHO for speed probe / external trigger
Input range:
AC /- 12 V peak-peakDC /- 24V
AD conversion:
24 bit, 64 bit internal gNo AutoGain function!
Frequency ranges (-3 dB):
Maximum range: 0.5 Hz - 25 kHz (64 kHz sampling)Minimum range: 0.5 Hz - 25 Hz (64 Hz sampling)
Sampling mode:
Fully simultaneous for all 3 channels
FFT resolution:
Min. 25 Max. 25 600 v>
Measurement modes:
Analyzer - analytical measurementsData collector - route measurementsBalancer - 1 and 2 plane on site balancingRecorder - raw for later post analysisRun Up - run up and coast down measurementsUltrasound - measurement of ultrasound in 30 - 50 kHz rangeLED stroboscope, LED torchFASIT - Expert system for automatic fault detectionVibration meter - basic vibration measurements
Software:
Free version of DDS software (limited database size)Licensed DDS software
Data processing:
Real time FFTDEMOD - ENVELOPE analysisACMT - low speed bearing analysisOrder analysisUser band pass analysisRPM measurementDC measurementOrbit measurement
IR temperature measurement:
From -70ËC to 380ËC (-94ËF to 716ËF)
Trigger:
Manual, External, Amplitude, Tacho
Display:
Colour 240 x 320 pixels, TFT
Interface:
USB 2.0, 3.0 compatible
Operating temperature range:
-10ËC to 50ËC
Power:
Battery pack for more than 6 hours of continous operation
Case:
Aluminium - heavy duty
Dimensions:
230 x 82 x 32 mm
Languages:
Languages: English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish
Adash A4300 VA3 Pro Ex Vibration Analyzer - NEW