The A4400 instrument contains these measurement modes:
FFT spectrum with 25 600 an>
|
Simultaneous Measurement |
Multi-measurements can be measured in parallel for a single measurement point, which save time; and improve consistency in data especially when the machine speed or running condition varies with time.Example of multi-measurements:
|
Balancing |
|
Data Collector |
A4400 VA4Pro can be used as a Data Collector for routine data collection.Parallel Measurements are performed simultaneously, that save time in data collection at each measurement point. It also improve consistency of data especially when the speed or process condition of the machine varies with time.For experienced user, historical data can be downloaded for on-site trending and comparison, so that diagnosis can made on spot immediately. |
Run-up / Coast Down |
Run-up / Coast-down can be easily carried out on A4400 VA4Pro. Raw time data can also be recorded as a backup for critical machine. 4 DC Process Parameters can be measured at the same time for correlation analysis with vibration readings.Different grais available for run-up / coast-down analysis:
|
Software DDS 2010 |
One software for all instruments! The Adash Ltd. keeps one rule all the time from 1991. The measured data from any instrument (portable or on- saved in one data format to the database. It enables to use just one data acquisition software. The software system DDS 2011 contains all functions, which are necessary for next data analysis. Main features:
|
The Adash A4400 VA4 Pro CMS PRO Balance Kit includes functionality for Data Collection, Run-up Analyzer, Balancer, Recorder, FASIT, Stethoscope, Lubri and Octive Analyzer in one unit! System includes: |
|
|