Those two machines ST-275B and ST-315B are semi-automatic cutting type. The machine head can turn left and right for 45° with precious angle n this way, it is easy to operate. The machine is equipped with worm and worm wheel transmission, which lead to high cutting rate and low noise. We advise automatic cooling system and bar ruler to be adopted in the machine for a better working condition of manual and pneumatic cutting machine.
MODEL | ST-275B | |
Main Drive Motor | 220V Single (opt.) | |
H Type 3.0HP/1.5HP(2/4 Pole) 50/60 HZ (std.) | ||
L Type 1.5/1.0 HP(4/8 Pole) 50/60 HZ (opt.) | ||
Blade Speeds | H Type:60HZ 120/60 RPM,50HZ 100/50 RPM (std.) | |
L Type:60HZ 60/30 RPM,50HZ 50/25 RPM (opt.) | ||
Head Swivel | 90°/45° | |
Clamping Vise | Double | |
Coolant Pump Motor | 40W | |
Saw Blade Size | Diameter (mm) | HSS Ã250 - Ã275(10"-11") Standard Ã250 |
Bore (mm) | 32 | |
Pin Holes (mm) | 2xÃ11xPCD 63 | |
Air Pressure (Consumption) | -- | |
Hydraulic Pump Motor | -- | |
Operation Pressure | -- | |
Machine Dimensions (LxWxH) (mm) |