68-point programmable controller

Product introduction:

The SPC-CFMC-D28N40A programmable controller has 3-channel CAN bus and 68-channel IO resource. The port can be highly multiplexed, the input port can use high-low level, voltage, current, pulse and other output port is DOH, 3A, can directly drive solenoid valve and also has 4-channel proportional valve PVC function and 16-channel PWM function. In addition, the product can choose 72 LED status indicators, which are very suitable for working in harsh conditions of large temperature variation, intense vibration, strong electromagnetic interference, salt corrosion and water immersion, etc and can be applied to the sanitation machinery, agricultural machinery, fire fighting machinery, construction machinery, road machinery, forestry machinery and other harsh environmental control occasions.

Product parameter：

1.           Shell: Cast aluminum alloy shielding

2.           Dimension (L*W*H): 252*162*61mm

3.           Assembly: 4 M5*60mm screws

4.           Connector: 86－Pin AMP

5.           Weight: 1.8 kg

6.           Operating temperature: -40～+85℃

7.           Working voltage: 8～32V DC

8.           Protection grade: IP65(with LED p>

9.           Total of input/output channels: 68 channels (42-channel input/40-channel output)

10.         Input: 42-channel input (multiplexed input included) can be configured at most

Product characteristics：

1. Support CoDeSys2.3 programming

2. 3-channel CAN and support CANOpen/SAEJ1939/ custom

3. 1-channel standard RS232 communication port and configurable baud rate

4. 1-channel sensor supply output, configurable 5V/10V output

5. 2-channel 0-5V reference voltage output

6. 1-channel voice alarm output

7. LED be configured for status indication and 72 LEDs can be supported

8. All input ports support misconnection power and ground; all output ports have short circuit and overheat protection