44-point programmable controller

Product introduction:

The SPC-CFMC-D20N24C2 programmable controller has 2-channel CAN bus, 1-channel RS-232 communication and 44-channel IO resource. The port can be highly multiplexed, the input port can use high-low level, voltage, current, pulse and other output port is DOH, 3A, can directly drive solenoid valve and has 20-channel open-circuit detection. In addition, the product can choose 72 LED status indicators, which are very suitable for working in harsh conditions of large temperature variation, intense vibration, strong electromagnetic interference, salt corrosion and water immersion, etc and can be applied to the sanitation machinery, agricultural machinery, fire fighting machinery, construction machinery, road machinery, forestry machinery and other harsh environmental control occasions.

Product parameter：

1.           Shell: Cast aluminum alloy shielding

2.           Dimension (L*W*H): 162*139*62mm

3.           Assembly: 4 M5*60mm screws

4.           Connector: 60－Pin AMP

5.           Weight: 1.0 kg

6.           Operating temperature: -40～+85℃

7.           Working voltage: 8～32V DC

8.           Protection grade: IP65

9.           Total of input/output channels: 44 channels (24-channel input/24-channel output)

10.         Input: 24-channel input can be configured at most

Product characteristics：

1. Support CoDeSys2.3 programming

2. Up to 44-channel input and output IO resource

3. 72 LED status indicators can be configured

4. 2-channel CAN and support CANOpen/SAEJ1939/ custom

5. All input ports support misconnection power and ground; all output ports have short circuit and overheat protection

6. support start-up and flameout detection