| Color | Grey |
| Thermal conductivity | 5~8w/m-k |
| Thickness | 0.5~5mm |
| Size | 200x400mm,300x400mm,can die-cutting as you required |
UHTP series are ultra-high thermal conductivity silicone pad with 5w/m-k~8w/m-k high-performance thermal conductivity interface material,which selecting 100% importing raw materials to fill the the air between heating device and heat sink or metal base.Its softness and flexibility make it can be used covering a very uneven surface.Heat transfer from the separation device or the entire PCB conduction to the metal shell or diffusion plate to improve the overall heat dissipation and improve the efficiency of heating electronic components and service life.
| Test item | Test method | Unit | UHTP500 | UHTP600 | UHTP700 | UHTP800 |
| Color | Grey | Grey | Grey | Grey | ||
| Thickness | ASTM D374 | mm | 0.5~5 | 0.5~5 | 0.5~5 | 0.5~5 |
| Specific gravity | ASTM D792 | g/cm3 | 3.1 | 3.4 | 3.5 | 3.5 |
| Hardness | ASTM D2240 | Shore C | 30 | 30~40 | 30~40 | 30~40 |
| Continuous use temperature | EN344 | ℃ | -40~+200 | -40~+200 | -40~+200 | -40~+200 |
| Voltage endurance | ASTM D149 | kv/mm | >5.0 | >5.0 | >5.0 | >5.0 |
| Flame rating | UL-94 | V-0 | V-0 | V-0 | V-0 | |
| Thermal conductivity | ASTM D5470 | w/m-k | 5.0 | 6.0 | 7.0 | 8.0 |
Tips:1.The original size is 200mmx400mm, 300mmx400mm and it is decided by the machine.However, it can die-cut to any size by machine again. So we can offer you the different size you need.2.As for color, the general is grey.If you need other color,please tell me.3.As for thermal conductivity,if you need others,also please let me know.
Features and advantages1.Ultra-High thermal conductivity,low thermal resistance;2. Soft and flexible to reduce the thermal resistance of interface;3. High electrical insulation,protecting the sensitive electronic components;4. ROHS UL compliant
Usage
Step 1
Clear the surface where you are going to paste the thermal pad;
Step2
Tear the protective film of one side and remember do not tear the protective film of both sides in the same time to reduce the times and scare of the thermal pad avoiding the damage of thermal pad stickiness and thermal conductivity.
Step3
Paste the side without protective film on the products, then tear the other side protective film, then install your electronic components on the thermal pad. After installation, press slightly and let it stay for a while to ensure the thermal pad fixed well.
Application
Grac/video card/memory High-speed hard disk driver Memory module
South and North Bridge
Heat sink of micro heat tube Control device of car engine Mobile
Portable electronic devices New energy car electronic device Led lighting
If you are interested in this kind products, welcome your inquiry
Signup today to claim your Discount. Get Started before it's too late!
