Metallized and coated matte PET film Coated PET Film PET Release ufacturers
Coated Matte PET Film Specifications:
Thickness(micron) | Width(mm) | Core ID(inch) |
19~50μm | 500~2000 | 3â€or 6†|
The specifications can be adjusted according to the customers’ requirements. | ||
Typical Values:
Property | Unit | Typical value | Testing Method |
Thickness | mm | 45 | DIN 53370 |
Tensile Strength（MD/TD） | MPa | 170/201 | ASTM D 882 |
Elongation at brea（MD/TD） | % | 170/102 | ASTM D 882 |
Heat shrinkage（MD/TD）150℃,30min | % | 0.8/0.2 | ASTM D 1204 |
Haze | % | 95.0 | ASTM D 1003 |
Gloss（45°） | % | 30 | ASTM D 2457 |
The above values of the properties obtained in our laboratory test. These values are for informative purpose and not in guarantee or warranty in any specific condition. Users are advised to conduct their own testing to determine product suitability to use.Firsta Matt PET Film Main characteristics:1. High haze, low light transmittance.2. Low gloss on the surface.3. The top-coating side of this product has superior printing ink adhesion for UV ink printing and bar code printing on labels, which will not fade away over time like the corona-treated side does.Matt PET Film Application:It is used as face stock of non-transparent self-adhesive label, such as electronic products.
Signup today to claim your Discount. Get Started before it's too late!
