Advantage
Even with the use of good materials, aluminum spigot truss needs years of experience teachers with superb technology welding, better welding process, beautiful welding scars, making aluminum spigot truss not easy to tear, longer service life.
Spigot Aluminum Truss rack details1ãComposed of international standard aluminum alloy 6061-T6/6082-T62ãImported welding rod3ãCheck the weight load before delivery4ãThe design is freely completed by the professionals of your choice Square Aluminum Spigot Truss Usage
It is suitable for exhibition building, store decoration and advertising. This single pipe has the best lifting capacity, and with its lightweight structure shows a low transportation volume.
Indoor: live stage, stage, theater, booth, car booth, wedding, etc.Outdoor: event gathering, LED display frame, concert, trade fair display, church installation mobile application, etc. Features of Square Aluminum Spigot TrussIt can be replaced, can be used again, and can provide lifetime serviceRust-proof, fire-proof, wear-resistant, light weight, high carrying capacityBolt type trusses are more popular and easier to arrange than bolt type trusses, and are easy to transport and stockHigh quality: Superb craftsmanship ensures product qualityThe truss can be perfectly connected with the global truss. Aluminum Spigot truss installation recommendations:
Build concert stage truss, concert truss process
Materials required to build a 12*6*6m concert stage: 12*3m concert stage trusses, 8*2m concert trusses, 8*1m concert trusses, 8*diagonal supports, 4*iron bases, 4*counter-heads, 4*square sets, 4*cross-arms, 4*slings, 4*hoists, screws, etc.
Note: Generally, the commonly used aluminum truss column is 300*300MM cross-section, and the truss beam is 300*300MM if the hanging stuff is not very heavy, and 400*400 or 450*450 if the span is large or the hanging light is heavy.
Concert stage truss construction method.
2. In the outer part of each base inserted into the bottom part of the diagonal support.
4. Set the square sleeve on the counter head.
6. The ends of the crossbeam and the two sides of the two square sleeve docking link, at this time the crossbeam part of the ground are assembled.