Direct Forming Mill To Square Pipe/Square Welded Tube Machine
Product description：
The production of square/rectangular pipes adopts the combined roller.. The roller position will be adjusted by spacer and motor adjustment to realize one set of roller to apply for different size of pipe.
Direct square and rectangular pipe mill feature:
1ã€Lower production cost: 3-4% material saving
2ã€Very precise control of the corner radius
3ã€Frequent production changes without a roll change: possibility to produce small lots of final products
4ã€Optimized design
5ã€Very fast changeover
6ã€Reduced investment: no requirement for different types of rolls and additional floor space for roll storage
7ã€Very high automation level: minimized operator tuning
Model | Square & Rectangle Pipe | Opening Cold Forming Steel | Speed (m/min) | ||
Diameter(mm) | Thickness (mm) | ||||
LW400 | □100 | 40×40~100×100 | 1.5~5.0 | The Same Specifications | 20~60 |
LW600 | □150 | 50×50~150×150 | 2.0~6.0 | 10~45 | |
LW800 | □200 | 80×80~200×200 | 3.0~10.0 | 10~35 | |
LW1000 | □250 | 100×100~250×250 | 4.0~12.0 | 10~35 | |
LW1200 | □300 | 150×150~300×300 | 4.0~14.0 | 10~30 | |
LW1400 | □350 | 200×200~350×350 | 4.0~16.0 | 10~30 | |
LW1600 | □400 | 250×250~400×400 | 6.0~18.0 | 6~20 | |
LW2000 | □500 | 300×300~500×500 | 8.0~20.0 | 6~20 | |
Signup today to claim your Discount. Get Started before it's too late!
