Feeding size | Less than 10 mm |
Capacity | 2-20 t/h |
Power | 1.5-5.5 kw |
Saw-tooth Wave Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for under size fraction. In practice, contrast of Saw-tooth Wave Jig and Sine Wave Jig shows up raises of recovery of Saw-tooth Wave Jig: Sn:3.01%, W:5.5%, Pb:1.63%, Zn:2.04%.
Model | Hutch area(㡠| Stroke(mm) | Frequency of stroke (r/min) | Input Size (mm) | Makeup water (m³/h) | Capacity (t/h) | Power (kw) | Dimensions(mm) |
LZJT1-1 | 0.74 | 15-25 | 80-120 | <5 | 1-2 | 2-3 | 1.5 | Tell Us What You NEED
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
Ok
|