LCP is a value of the thermal interface material. The material is made on the base of coating thermally conductive polymer on fiberglass silicone tape coated substrate for easy to process and assembly. The softness and high adhesive can be used in filling the air gap between the PC board and the radiator or metal case. And its high adhesive is suitable for low stress shock absorption. Single-sided stickiness and puncture resistance is an electrical insulation material for the use of filling cooling insulation for activities or with the needle irregular heaters. Also it can also be used for thermal conductive between high-voltage bare nd heat sink.
Features:
 Only one side is sticky
 Enhanced anti-puncture, shear and tear resistance
 High fit, low-hardness gap filling material
 Strong electrical insulation
Applications:
 Power supply module
 Car battery pack
 Power conversion equipment
 Car equipment / charger
 Where heat is to be transmitted to a rack, chassis, or other heat sink
sical Properties:
Test Item | Test Method | Unit | LCP100Â Test Value | LCP150Â Test Value |
Color | Visual | - | White&Pink | White&Pink |
Thickness | ASTM D374 | mm | 0.5~10 | 0.5~10 |
Hardness | ASTM D2240 | Shore 00 | 40~80 | 40~80 |
Specific Gravity | ASTM D792 | g/cm3 | 2.1 | 2.5 |
Tensile Strength | ASTM D412 | Mpa | 2.5 | 2.5 |
Elongation | ASTM D412 | % | - | - |
Tear Strength | GBT 529-2008 | KN/m | 4.2 | 4.2 |
Breakdown Voltage | ASTM D149 | KV/mm | ≥8 | ≥8 |
Volume Resistivity | ASTM D257 | Ω·cm | 1×1013 | 6×1013 |
Continuous Use Temp | EN344 | ℃ | -40~150 | -40~150 |
Flame Rating | UL94 | - | V-0 | V-0 |
Weight Loss | @150℃240H | % | ≤0.5 | ≤0.5 |
Dielectric Constant | ASTM D150 | @1MHz | 5.2 | 5.7 |
Thermal Conductivity | ISO 22007-2 | W/m·K | 1.0 | 1.5 |
Standard size：200mm×400mm，300mm×400mmï¼›Customized size available;Â
For more , please kindly feel free to rita(at)szutd com
Signup today to claim your Discount. Get Started before it's too late!
