LC120 thermal silicone pad is a very cost-effective general economic thermal gap filling gasket, soft with its own micro-stick, easy assembly. Under low compressing force to show good thermal conductivity and electrical insulation properties. Bedding on the gap between the heat device and the heat sink or the machine shell to extrude air to reach the full forming a continuous thermal conduction. Using heat sink or machine shell as a cooling device can effectively increase the cooling area to achieve a good cooling purposes.
Features & Benefits:
l Low cost, high efficiency, cost-effective
l Replace the volatile pollution of the thermal grease
l Natural sticky, easy to install, can be reused
l Wide range of thickness, can fill any uneven size gap
Typical Applications:Â Â
l Communication equipment   Â
l New energy vehicles / power batteries
l Computer                 Â
l Car equipment / charger
l Switching power supply      Â
l PC server / workstation
l Flat-panel TV                Â
l Optical drive / COMBO
l Security equipment          Â
l Notebook computers
l Video equipment            Â
l Any heating tor
sical Properties:
Test Item | Test Method | Unit | LC120 |
Color | Visual | - | Off white |
Thickness | ASTM D374 | mm | 0.3~15.0 |
Hardness | ASTM D2240 | Shore 00 | 40±5~80±5 |
Specific Gravity | ASTM D792 | g/cm3 | 2.1 |
Tensile Strength | ASTM D412 | Mpa | 0.34 |
Elongation | ASTM D412 | % | 100 |
Tear Strength | GBT 529-2008 | KN/m | 1.4 |
Breakdown Voltage | ASTM D149 | KV/mm | ≥10 |
Volume Resistivity | ASTM D257 | Ω·cm | 8×1012 |
Continuous Use Temp | EN344 | ℃ | -40~150 |
Flame Rating | UL 94 | - | V-0 |
Weight Loss | @150℃240H | % | ≤0.5% |
Dielectric Constant | ASTM D150 | @1MHz | 5.41 |
 Thermal Conductivity | ASTM D5470 | W/m·K | 1.2 |
Standard size：200mm×400mm，300mm×400mmï¼›Customized size available;Â
Coated with fiberglass/one side or double side adhesive/aluminum foil available
For more , please feel free to us . Â
rita(at)szutd  com
Signup today to claim your Discount. Get Started before it's too late!
