Color | White |
Model STR5001X
Type:FTTx Solutions
Use:FTTH
PON Interface:1 GPON BOB (Class B+/Class C+)
Operating Temperature:0â~+50â
LAN Interface:1x 10/100/1000Mbps auto adaptive Ethernet interface
Wavelength:TX: 1310nm, RX: 1490nm
Optical Interface:SC/UPC Connector
Power Supply:DC 12V/0.5A
Power Consumption:<3W
Transmission distance:20KM
Receiving sensitivity:â¤-27dBm/â¤-29dBm
Warranty:1 Year
1. Overview
â STR5001X is designed as HGU (Home Gateway Unit) in deferent FTTH solutions,The carrier-class FTTH application provides data service access.â STR5001X is based on mature and stable, cost-effective XPON technology. Itcan switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.â STR5001X adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0 and GPON Standard of ITU-TG.984.X2. Functional Feature
â Support EPON/GPON mode and switch mode automaticallyâ Support ONU auto-discovery/Link detection/remote upgrade of softwareâ Support Route PPPoE/IPoE/Static IP and Bridge modeâ Support IPv4/IPv6 Dual modeâ Support Firewall function and IGMP multicast featureâ Support LAN IP and DHCP Server configurationâ Support Port Forwarding and Loop-Detectâ Support TR069 Remote Configuration and maintenanceâ Specialized design for system breakdown prevention to maintain stable system
3.Application
â Typical Solutionï¼FTTO(Office)ã FTTB(Building)ãFTTH(Home)â Typical Businessï¼INTERNETãIPTV etc
Hardware Specification
Technical item | Details |
PON Interface | 1 GPON BOB ï¼Class B+/Class C+ï¼ |
Receiving sensitivity: â¤-27dBm/â¤-29dBm | |
Transmitting optical power:+0.5~+5dBm/+2~+7dBm | |
Transmission distance: 20KM | |
Wavelength | TX: 1310nm, RX: 1490nm |
Optical Interface | SC/UPC Connector |
Chip Spec | RTL9601D ,CPU 300MHz,DDR2 32MB |
Flash | SPI Nor Flash 16MB |
LAN Interface | 1x 10/100/1000Mbps auto adaptive Ethernet interface. RJ45 connector |
LED | 4 LED, For Status of PWRãLOSãPONãLINK/ACT |
Push-Button | 2,For Function of Power on/off,Reset |
Operating Condition | Temperature: 0â~+50â |
Humidity: 10%ï½90%ï¼non-condensingï¼ | |
Storing Condition | Temperature: -30â~+60â |
Humidity: 10%~90%ï¼non-condensingï¼ | |
Power Supply | DC 12V/0.5A |
Power Consumption | <3W |
Dimension | 120mmx78mmx30mm(LÃWÃH) |
Net Weight | 0.13Kg |
Pilot | Status | Description |
PWR | On | The device is powered up. |
Off | The device is powered down. | |
PON | On | The device has registered to the PON system. |
Blink | The device is registering the PON system. | |
Off | The device registration is incorrect. | |
LOS | Blink | The device doses not receive optical td> |
Off | The device has received optical d> | |
LINK/ACT | On | Port is connected properly (LINK). |
Blink | Port is sending or/and receiving data (ACT). | |
Off | Port connection exception or not connected. |