Single and double-sided PCBs
Even in 1- and 2-layer circuit boards, the demand for precision and innovation can be very high. VARIOPRINT offers a wide range of technologies in this product field.
Fine ctures down to 50 µm, controlled depth-drilling or routing, complex mechanical contour cutting, manufactured using routing or laser technology in a wide range of materials. The range is enormous. Challenge us with your most demanding requirements! Highly trained specialists, including engineers, poly-mechanics and galvano-technicians look forward to your challenge.
Design and technologySingle and double-sided PCBs with/without through-plating in a diverse choice of materials. |
Dimension and formatsThickness 0.2 mm to 4.8 mm Format up to 569x490 mm |
Solder resists and additional printsto-sensitive solder mask in different colours, applied by spray coating and screen printing Additional prints, such as legend print, peelable mask and carbon print |
Conductive pattern structuringCopper cladding from 18 μm to 210 μm Conductor widths and spacings down to 50 µm / 50 µm |
Mechanical machining Contour milling Depth milling Scoring Laser processing Complex contour machining and demanding depth milling can be executed with maximum precision and high efficiency. |
MaterialsFR4, TG 135°C with fillerFR4 highTG 170°C Halogen-free materials PTFE materialsSpecial materials |
End surfacesVarious chemical and galvanic gold surfaces and chemical tin and silver surfaces, as well as pure organic protective coatings. Special surface requirements, such as partial hard gold on ENIG is just one example of our large portfolio. |
Electroplating and copper platingAspect ratio up to 1:12 with 0.15 mm drill diameter, 1:15 with 0.3 mm drill diameter, copper in vias in accordance with IPC II (min 15 µm - 20 µm), IPC III (min 25 µm) or customer specific |