Brake hose Impulse Test Stand

IVS Impulse test stand is applied to performing the impulse/fatigue/life time test on automobile steering hoses, brake hoses, air-conditioner hoses, fuel pipes, cooling water pipes, radiator hoses, heater hoses, air filter hosse, turbo, Booster system hoses, engineering hydraulic hoses, aerospace hose & hose assemblies, other pipes or end fittings , heat exchanger , air conditioner, filters, etc

Technical data:

· Max impulse pressure: 70Mpa (Accuracy: 0.1Mpa) · Test waveform: Basic Square Waveform, T Waveform, Triangle Waveform, Sine Waveform *(Optional) · Frequency: 0~1.5Hz (Depends on the total volume & sical character. · Ambient temperature: Normal Temp or -40~150±3℃ · Medium temperature: Normal Temp~150±3℃ or -40~150±3℃ · Test pieces: 2-8 pcs (Depends on the total volume & sical character. · Test medium: Hydraulic oil or DOT · Pulsing cycles: >10 million cycles · Test waveform: Basic Square Waveform, T Waveform, Triangle Waveform, Sine Waveform *(Optional)Mounting mode: 1800 or 900 (As per the standard) · Dimension:3modules: · PC console: customized size · Power station: 1800mm×1200mm×1600mm · Test Chamber:1500mm×900mm×1000mm

Features:

· Fully automated test stand with high speed data acquisition system. · History screen and real-time display of pressure-time curves. · Test data saved automatically when emergency or power down happens accidently. · Multi-samples can be tested independently at a time. · From the control theory to the quality, advanced electrical components guarantee high test precision and stability. · IVS test software is programmable, stable and reliable. · Automatic pressure maintaining reduced the working time of motor and pressurizing section, enhanced the stability, life time and pressure precision of whole testingsystem. · Equipment features overpressure/overload protection. · Auto stop testing when a rupture occurs, prevent the operators and equipment from damages to the utmost. · Automatically drain the air off remained in the test specimen at the beginning of the test. · Providing with various of fixtures to satisfy the connecting of hose and hose assemblies. · Installing distance adjustable freely as per hoses'minimum bend radius and test standards. · Impulse test with monflexing or without flexing. *(Optional)